A Study of Some Factors Affecting the Quality of Carded Sliver on High Production Card. | ||||
MEJ- Mansoura Engineering Journal | ||||
Article 24, Volume 15, Issue 1, June 1990, Page 36-46 PDF (91.85 K) | ||||
Document Type: Research Studies | ||||
DOI: 10.21608/bfemu.2021.171019 | ||||
View on SCiNiTO | ||||
Author | ||||
Ismail Mousa Mohamed El-Metwally Rakha | ||||
Assistant Professor of Textile Engineering Department., Faculty of Engineering, Mansoura University, Mansoura, Egypt. | ||||
Abstract | ||||
In the present investigation two types of Egyptian Cotton Fibres were processed through higher production m/c into cared sliver. The experiments were carried out by varying Four parameters (Card settings) at Four positions at two levels. Using 24 Factorial design technique. The sliver quality in terms of uster eveness c.v. % and card weh neps /100 inch2 were determined. The experimental results explored the influence of settings between m/c parts on the cotton sliver quality. The results show that the lower rate of neps in the card web is obtained at closer setting between cylinder and doffer and between cylinder and flats. The better sliver regularity resulted by decreasing the discussed setting in the material flow direction. The factors interactions show significant effect on the sliver quality. | ||||
Statistics Article View: 53 PDF Download: 92 |
||||