Warp Tension Distribution across Warp Sheet on Air Jet Weaving Machine. | ||||
| MEJ- Mansoura Engineering Journal | ||||
| Article 25, Volume 15, Issue 1, June 1990, Page 47-60 PDF (119.86 K) | ||||
| Document Type: Research Studies | ||||
| DOI: 10.21608/bfemu.1990.171064 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| A. Shaheen1; Ahmed Sami Mostafa Ahmed El-Deeb2 | ||||
| 1Textile Engineering Department, Faculty of Engineering, Mansoura University, Mansoura, Egypt. | ||||
| 2Assistant Professor of Textile Engineering Department., Faculty of Engineering, Mansoura University, Mansoura, Egypt. | ||||
| Abstract | ||||
| In this work experimental measurements were carried-out Suizer-Ruti L5000 air get weaving machine under two different weaving machine speeds and two different air preasure of the remachine supports. The experiments also included the affect heald shaft position and warp thread position within the sa heald shaft on the values of warp tension. The maximum dynamic tension of single warp threads caused beat-up and shedding were measured in addition to tgeir bas static tension for two successive weaving machine cycles duri-weaving 1/1 simple plain weave st 30 different positions regular spaced across warp sheet width in the same heald shaft and drop bar. The previous warp tension values for the first and the laheald sheft on tsn successive warp threads choosed from left middle and right across the warp sheet width were aiso measured determine the tension variation within and inbetween heald shafts | ||||
|
Statistics Article View: 49 PDF Download: 118 |
||||
