Influence of Cotton Waste Fibre Properties, Twist Multiplier and Yarn Linear Density on Open-End Yarn Quality. | ||||
| MEJ- Mansoura Engineering Journal | ||||
| Article 16, Volume 13, Issue 1, June 1988, Page 1-16 PDF (142.56 K) | ||||
| Document Type: Research Studies | ||||
| DOI: 10.21608/bfemu.1988.172796 | ||||
 View on SCiNiTO | ||||
| Author | ||||
Rizk Abd Allah Mahmoud El-Bealy 
| ||||
| Assistant Professor, Textile Engineering Department, Faculty of Engineering, Mansoura University, Mansoura, Egypt. | ||||
| Abstract | ||||
| The aim of this work is to study the influence of the following parameters: waste fibre properties, twist multiplier and yarn linear density on open end yarn characteristics. Cotton waste fibres which extracted from Giza 70, raw cotton "Giza 31" and their blends were the subject of the experiments. A wide range of yarn count Nm 14 to Nm 34 and twist multiplier α m 115 to α m 140 was used. The results declared that, there is a significant correlation between fibre parameters and open-end yarn properties . The increase in twist multiplier and as yarn becomes finer does affect the open-end yarn quality. | ||||
|
Statistics Article View: 49 PDF Download: 103 |
||||
