The Mechanistic role in production linen fabric using different Piqué Technique.
El-Tantawi, A. (2021). The Mechanistic role in production linen fabric using different Piqué Technique.. EKB Journal Management System, 11(4), 369-386. doi: 10.21608/idj.2021.181159
Ahmed Ramadan Abd El Hamid Mohammed El-Tantawi. "The Mechanistic role in production linen fabric using different Piqué Technique.". EKB Journal Management System, 11, 4, 2021, 369-386. doi: 10.21608/idj.2021.181159
El-Tantawi, A. (2021). 'The Mechanistic role in production linen fabric using different Piqué Technique.', EKB Journal Management System, 11(4), pp. 369-386. doi: 10.21608/idj.2021.181159
El-Tantawi, A. The Mechanistic role in production linen fabric using different Piqué Technique.. EKB Journal Management System, 2021; 11(4): 369-386. doi: 10.21608/idj.2021.181159

The Mechanistic role in production linen fabric using different Piqué Technique.

International Design Journal
Article 30, Volume 11, Issue 4 - Serial Number 41, July and August 2021, Page 369-386  XML PDF (2.39 MB)
Document Type: Original Article
DOI: 10.21608/idj.2021.181159
View on SCiNiTO View on SCiNiTO
Author
Ahmed Ramadan Abd El Hamid Mohammed El-Tantawi
Faculty of Applied Arts, spinning weaving and knitting Department, Damietta University, en_a.r5050@hotmail.com
Abstract
Each fabric material has its unique existence; for instance, the Linen fabric is popular not only for its attractive appearance and rich history but also the manufacture of this fabric is characterized by complicated interlacing techniques to shows its splendor. When it comes to varieties of piqué technique to production most linen fabric in markets, it is worth understanding about realizing process owing to a decade's worth of learning from its manufacturing experience. This study intends to analyze the respective effect of the mechanistic role at weaving machines as shed angle, warp tension and weave density with different pique techniques on Linen fabrics propriety. It is founded that Clear Positive and Opposite relationships between measured parameter give clear judgment for assessing the behavior of blended linen fabrics for textile manufacturers in terms of mechanical and physical properties with customer satisfaction is intended; as well as an indicator for reasoning cluster of excellence integrative production and economical aspects, which is a factor in markets
Keywords
Linen Fabrics; Piqué Technique; Shed Angle
References
  1. Mohsen Miraftab., (2009). Fatigue Failure of Textile Fibres. 1st Edition Woodhead publishing series in textile, Cambridge, England. 
  2. Mukesh Kumar Singh., (2014). Industrial practices in weaving preparatory. Woodhead publishing India Pvt Ltd.  
  3. Norma Hollenand. & Jane Saddler. (1964). TEXTILES. 2st Edition, THE Macmillan company, New Yourk. 
  4. Picanol.be. manufacturer. User hand manual for Model (Opti-Max I 2021).
  5.  Polona Dobnik Dubrovski. (2010). Woven Fabric Engineering, Sciyo, Intech Open Limited, London, United Kingdom.
  6. Sabit Adanur, B.S., M.S., (2001). Hand book in weaving., Sulzer Textile Limited Switzerland, CRC Press is an imprint of Taylor & Francis Group.
  7. Samir Kumar Neogi. (2015). Role of Yarn Tension in Weaving. 1st Edition. Woodhead publishing series in textile, India, Pvt Ltd.  
  8. Seher Perincek. & Kerim Duran., (2016). Optimization of enzymatic & ultrasonic bio-scouring of linen fabric by aid of Box-Behnken Experimental Design. Journal of Cleaner Production (135).
  9. Sheikhzadeh M, Hosseini S. & Darvishzadeh, M., (2007). Theoretical evaluation of warp tension variations during weaving process. Indian J Fiber Text Res (32). 
  10. Suzan Ahmed., Shah Alimuzzaman. A. K. M. & Monjurul Haque. (2020). Effect of shed geometry on starting mark of woven fabric. SN Applied Sciences journal. (2)4.
  11. Varadarajan, C. B. Senthil Kumar & N. Gokarneshan., (2013). Mechanics and calculations of textile machinery. Woodhead Publishing India 1st .
  12. William Watson (1921). Textile Design and colour elementary weaves and figured fabrics 2st Edition. Longmans, Green and Co.
  13. Xiaogang Chen., (2005). Characteristics of Cloth Formation in weaving and their influence on fabric parameters, Textile Research Journal. 75(4).
  14. Yildiray Turhan. & Recep Eren., (2011). The effect of loom settings on wearability limits on air-jet weaving machines. Textile Research Journal 82(2).   
  15. Z.J. Grosicki., (1925). Watson's Advanced Textile Design. Compound Woven Structure, 3st Woodhead publishing series in textile, Cambridge, England.
  16. Zitouni Azari, Nawar Kadi. & Amer Kaarnoub. (2015). The effect of warp tension on Jacquard fabrics specification, Journal of Textile and Fashion Technology, (1) 1.
  17. Züleyha Degirmencil. & Ebru Çoruh., (2016). Comparison of the performance and physical properties of plain, pique, double pique and fleeced knitted fabrics. Tekstile ve Konfeksiyon 26(2). 
Statistics
Article View: 318
PDF Download: 374