The Efficiency of Using Building Integrated Photovoltaics in the Retrofitting of Office Buildings in Egypt | ||||
| Port-Said Engineering Research Journal | ||||
| Article 5, Volume 25, Issue 2, September 2021, Page 53-59 PDF (660.84 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/pserj.2021.64601.1095 | ||||
 View on SCiNiTO | ||||
| Author | ||||
Maha Fawzy Anber 
| ||||
| Architecture department, Higher institute of engineering, Elshorouk Academy | ||||
| Abstract | ||||
| The use of Photovoltaic (PV) technology has spread recently due to its significant contribution in the generation of energy as well as reducing the carbon footprint of buildings. The different materials of building envelope contribute differently to the energy consumption of the building concerning heat transfer. This research paper aims at studying the efficiency of integrating Building Integrated Photovoltaics (BIPV) in the building skin to reduce energy consumption rates and reduce admitted solar heat gain. This study includes an energy simulation study using an energy simulation software to hold a numerical comparative study between two different types of Building Integrated Photovoltaics (BIPV) that are integrated to the building skin in order to contribute in reducing the energy demand by the building to determine the most efficient type. Moreover, the research states the feasibility of using them as it is tested along with the payback period of the initial cost of installing them. | ||||
| Keywords | ||||
| Building integrated photovoltaics (BIPV); Energy simulation; Building envelope; DesignBuilder Software; Payback period | ||||
|
Statistics Article View: 349 PDF Download: 332 |
||||
