Manufacturing and Evaluation of a Prototype for Grading of Cereal Corps | ||||
Annals of Agricultural Science, Moshtohor | ||||
Article 3, Volume 59, Issue 2, June 2021, Page 367-382 PDF (1.52 MB) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/assjm.2021.186275 | ||||
![]() | ||||
Authors | ||||
El-Sayed Khater ![]() ![]() | ||||
1Agricultural and biosystems Engineering Dept., Faculty of Agriculture, Benha University | ||||
2Faculty of Agriculture at Moshtohor, Benha University | ||||
Abstract | ||||
The main aim of the present study is to develop, fabricate and evaluate a rotating grader for grading cereal corps. The effect of different orifice sizes (<7.5, 7.5 to 9.5 and 9.5 to 11.0 mm), inclination angles (0, 3, 5 and 7ᵒ) and rotational speeds of drum (25, 30, 35, 40, 45 and 50 rpm) were studied. The grader productivity, efficiency, specific energy consumption and costs were determined. The obtained results indicated that the grader productivity increased from 11.73 to 49.38, 145.72 to 213.38 and 110.29 to 236.52 kg h-1, with increasing orifices size from small to large, inclination angles increased from 0 to 7ᵒ and rotational speed of drum increased from 25 to 50 rpm, respectively. The grader efficiency decreased from 99.00 to 81.89, 89.38 to 87.12 and 89.46 to 86.62 %, with increasing orifices size from small to large, inclination angles increased from 0 to 7ᵒ and rotational speed of drum increased from 25 to 50 rpm, respectively. The specific energy consumption of grader increased from 10.77 to 13.62 and 9.14 to 14.81 kW h ton-1, with increasing inclination angles increased from 0 to 7ᵒ and rotational speed of drum increased from 25 to 50 rpm, respectively. The total cost of grader decreased from 0.07 to 0.05 and 0.09 to 0.04 EGP kg-1, with increasing inclination angles increased from 0 to 7ᵒ and rotational speed of drum increased from 25 to 50 rpm, respectively. | ||||
Keywords | ||||
Grader; Productivity; Efficiency; Energy; Cost | ||||
Statistics Article View: 200 PDF Download: 224 |
||||