Dynamic Characteristics of Industrial Robots, Using Segmented Trajectories. | ||||
| MEJ- Mansoura Engineering Journal | ||||
| Article 7, Volume 16, Issue 2, December 1991, Page 67-79 PDF (340.12 K) | ||||
| Document Type: Research Studies | ||||
| DOI: 10.21608/bfemu.2021.187955 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| F. F. G. Areed* | ||||
| Control & Computers Engineering Department., Faculty of Engineering., El-Mansoura University., Mansoura., Egypt. | ||||
| Abstract | ||||
| Robotic systems represent one of the most advanced industrial applications. Such robotic systems have a severe oscillatory behavior, thus the conventional control techniques are not suitable to deal with it. In the present paper, the dynamic dynamic behavior of robotic systems is studied and a dynamic model for such systems is obtained. A suitable trajectory for each link is pre-determined. The technique introduced proposes a segmented trajectory rather than a continuous one. A comparative study between the behaviour of the system with the proposed technique and that proposed in [7] is introduced. The above mentioned algorithm assumed that the chosen path is continous and this can be used in some tasks, required to be carried-out by the robot. But in other tasks, it is sometimes required that the robot must move a short distance from a point to another neighbouring point i.e. , the path is not continuous but, it is a segmented path. Such pathes are required in different tasks, such pathes are weiding, paint spraying, cxarrying a tray of drink……..etc. | ||||
|
Statistics Article View: 135 PDF Download: 98 |
||||
