Stastical Analysis of some Loom Parameters Affecting Yarn Stops on Air Jet Loom. | ||||
| MEJ- Mansoura Engineering Journal | ||||
| Article 33, Volume 16, Issue 2, December 1991, Page 71-81 PDF (452.06 K) | ||||
| Document Type: Research Studies | ||||
| DOI: 10.21608/bfemu.2021.188269 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| Mahmoud Salama* | ||||
| Assistant Professor., Textile Engineering Department., Faculty of Engineering., El-Mansoura University., Mansoura., Egypt. | ||||
| Abstract | ||||
| In this work, the factorial design technique was used to investigate the influence of some loom parameter on the yarn stops during weaving on air jet loom. These parameter are the timing of harnesses crossing, machine speed and position of back beam. The statistical analysis showed that the warp and weft stops are signficantly affected by these parameters. The interaction between these parameter had a large influence on the yarn stops. The analysis of yarn stops was done on picanol and Tsudokoma air jet looms for comparison. | ||||
|
Statistics Article View: 93 PDF Download: 140 |
||||
