The Use of Anion-Exchange Resin (A 162) as a Bromine Carrier for the Bromination of 2 Acylfurans. | ||||
MEJ- Mansoura Engineering Journal | ||||
Article 8, Volume 17, Issue 3, September 1992, Page 15-20 PDF (43.72 K) | ||||
Document Type: Research Studies | ||||
DOI: 10.21608/bfemu.2021.188729 | ||||
View on SCiNiTO | ||||
Authors | ||||
M. SH. Fayed* 1; M. A. Sadek1; Ibrahim Gar Al-Alam Rashed2 | ||||
1Chemical Engineering Department., Military Techenical College., Cairo., Egypt. | ||||
2Professor of Physical Science Engineering Department., Faculty of Engineering., El-Mansoura University., Mansoura., Egypt. | ||||
Abstract | ||||
The anion-exchange resin A-162 commercially available in the chloride form was prepared in the perbromide form to be used as brominating agent for the bromination of 2-acylfurans. The monobromo derivatives were obtained in very high yield at normal temperature without the appearance of byproducts. The resin was separated at the end of the reaction by simple filteration and could be recycled for further runs. | ||||
Statistics Article View: 61 PDF Download: 69 |
||||