Design and Application of a Transistorised Inverter Suitable for Switched Reluctance Drives. | ||||
| MEJ- Mansoura Engineering Journal | ||||
| Article 18, Volume 13, Issue 1, June 1988, Page 82-90 PDF (110.35 K) | ||||
| Document Type: Research Studies | ||||
| DOI: 10.21608/bfemu.2021.189371 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| M. A. El-Khazendar* 1; A. H. M. Kalas2; M. S. Abuzeid3 | ||||
| 1Assistant Professor, AMIEE., Electrical Power Engineering Department, Faculty of Engineering, Tanta University, Tanta, Egypt. | ||||
| 2Assistant Professor, Suez Canal University, Egypt. | ||||
| 3Assistant Professor, Tanta University, Egypt. | ||||
| Abstract | ||||
| This paper gives the design procedure and testing results of an economical unipolar inverter circuit together with a simple but reliable position transducer had been used to drive a 2-Phase variable reluctance disc motor. The prototype switching circuit has one bipolar power transistor per phase and an external resistor for dumping the stored magnetic energy. The different components of the main switching circuit, the interface circuit, the control login circuit and the electronic protection circuit have been worked out. The running performance of this drive system has been investigated through several experimental results. Different torque-speed characteristics are shown to be obtainable by controlling both switch-on angle and conduction angle, The overall performance of the system is still rather poor but it is considered to be satisfactory for this stage of development. | ||||
|
Statistics Article View: 56 PDF Download: 93 |
||||
