Study of Mechanical Properties and Wear Resistance of Pure Aluminium / TZ-3Y20A Composites | ||||
| Arab Journal of Nuclear Sciences and Applications | ||||
| Article 13, Volume 54, Issue 4, October 2021, Page 126-132 PDF (939.07 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ajnsa.2021.66693.1453 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Nabil Mansour   1; Ahmed Hassan2; Omyma Ibrahim 1; Abdel Aziz Fahmy Waheed3
| ||||
| 1Metallurgy Department, Nuclear Research Center, Egyptian Atomic Energy Authority | ||||
| 2Metallurgy Department, nuclear research center, Egyptian Atomic Energy Authority | ||||
| 3Materials Division, Metallurgy Department, Nuclear Research Center, Atomic Energy Authority, Cairo, Egypt | ||||
| Abstract | ||||
| The composite materials studied in this work were pure Aluminium reinforced by TZ-3Y20A particles with different percentage 0,5,10,15 and 20 weight percent. The particle size of TZ-3Y20A was 25µm. The starting materials were examined by SEM, and XRD techniques and optical microscopy. Spherical shape is observed for TZ-3Y20A powder and irregular shape particles were observed for Al powder. SEM photos also, show the shape of, 0%, 5% 10%, 15 and 20% Al- TZ-3Y20A powder milled for 24hr particle powder where the mixed powder became smaller and irregular for percentage of TZ-3Y20A powder increasing. The composite materials were investigated by hardness test which reveal the increase of hardness as the particles percentage increase. The results show that an increase in ultimate tensile strength in specimen with TZ-3Y20A particles, then a decrease in ultimate tensile strength as the percentage of TZ-3Y20A particles increase. The wear test reveals an increase in wear resistance as TZ-3Y20A particles percentage increase. | ||||
| Keywords | ||||
| composite materials; pure Aluminium powder; Aluminium reinforced by TZ-3Y20A particle; wear test; X-ray radiography | ||||
|
Statistics Article View: 485 PDF Download: 473 |
||||
