Effect of the Deflection of Squeezing Rollers in Sizing Box on the Sized Yarns. | ||||
MEJ- Mansoura Engineering Journal | ||||
Article 26, Volume 13, Issue 2, December 1988, Page 55-62 PDF (416.79 K) | ||||
Document Type: Research Studies | ||||
DOI: 10.21608/bfemu.2021.189730 | ||||
View on SCiNiTO | ||||
Author | ||||
A. Shahin* | ||||
Textile Engineering Department., Faculty of Engineering., El-Mansoura University., Mansoura., Egypt. | ||||
Abstract | ||||
In this work the percentage of sizing material in the yarn was measured across the warp sheet after the sizing process. The considered parameters in this experiment are : -Yarn count -Yarn material The deflection of squeezing rollers affect the distribution of the sizing material across the warp sheet. It was found that, the percentage of the sizing material in the middle of the warp sheet is higher than in sides. The deflection of squeezing rollers was theoretically calculated for a Zell-sizing machine. | ||||
Statistics Article View: 77 PDF Download: 107 |
||||