EFFECT OF ADDING BANANA PSEUDO STEM (BPS) ON THE MECHANICAL PROPERTIES OF ABS COMPOSITES | ||||
Journal of Al-Azhar University Engineering Sector | ||||
Article 24, Volume 13, Issue 48, July 2018, Page 1090-1098 PDF (1.34 MB) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/auej.2018.18983 | ||||
View on SCiNiTO | ||||
Authors | ||||
Mohamed Sameh Ahmed; Taiser Attia; Ayman Aly Abd El-Wahab | ||||
Designs and Production Department, Faculty of Eng., Ain Shams University, Cairo, Egypt | ||||
Abstract | ||||
BPS was used as reinforcement fibers in ABS matrix. Banana fibers were pretreated by using Sodium hydroxide solution with 5% concentration for 24 hours in order to enhance the adhesion interface between banana fibers and ABS Matrix. ABS/BPS composites were prepared at 0, 10, 20 and 30 wt% banana fibers. The ultimate tensile strength (UTS) and impact toughness for BPS/ABS composites at 0, 10, 20, 30 % fiber weight percentage were studied. The SEM observation for fracture surfaces was investigated. The thermal stability of the composites is studied using TGA test. | ||||
Keywords | ||||
BPS/ABS composite; NaOH; UTS; impact toughness; SEM; TGA; Thermal stability | ||||
Statistics Article View: 241 PDF Download: 432 |
||||