MANUFACTURE AND PERFORMANCE EVALUATION OF A SELF-PROPELLED COMPOST TURNING MACHINE | ||||
Misr Journal of Agricultural Engineering | ||||
Article 73, Volume 25, Issue 4, October 2008, Page 1478-1492 PDF (249.43 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/mjae.2008.190283 | ||||
View on SCiNiTO | ||||
Authors | ||||
M . M Morad1; A . F. Abdel Mottaleb2; T.Z. Fouda3 | ||||
1Prof of Agric. Eng., Fac. of Agric. Zagazg Unvi., Egypt. | ||||
2Senior Res Agri. Eng. Res. Inst. (A.R.C.), Egypt., Egypt. | ||||
3Assoc. Prof. of Agric. Eng., Fac. of Agric. Tanta Unvi., Egypt. | ||||
Abstract | ||||
A self- propelled compost turning machine was developed and locally manufactured from a low cost, local material to be suitable for Egyptian farms. Performance evaluation of the manufactured machine was carried out in terms of compost density, composting time, machine capacity, energy requirements, final product quality and turning cost. The machines performance was studied as a function of change in machine forward speed, rotor peripheral velocity pile height and number of compost turning per month. The experimental results reveal that final product quality and turning cost were in the optimum region under the following conditions: - Machine forward speed of about 1500 m/h. - Rotor peripheral velocity of about 240 rpm. - Pile height of about 100 cm. - Number of compost turning of four times per month | ||||
References | ||||
Abd El-Mottaleb A.F., (2006). Effect of some operating parameters on the performance of compost turning machines. Misr J. Ag. Eng., 23 (1): 40-54.
Abd El-Mottaleb A. F., (2008) . Design of a simple upright compost turning machine for small farmer Misr J. Ag. Eng., 25(2):1-17
Alfano G., C. Belli, G. Lustrato and G. Ranalli 2007. Pile composting of two-phase centrifuged olive husk residues: Technical solutions and quality of cured compost Waste Management, Volume 27, Issue 9, 2007, Pages1092-1098
Awady, M. N. (1978). Tractor and farm machinery . Txt bk., Col. Ag., Ain Shams U.: 146-167.
Barger E. L.; J. B. L. Edohl; W. M. Carletor and E. G. Mchibben (1963). Tractor and their power units. 2nd Ed, Wileysons Inc., New YorkU.S.A.
Klenin, N. E.; E. F. popov and V. A. Sakun (1985). Agricultural machines. America publishing Co. prt. Lid., New Delhi. 633pp.
Rynk, R. (1992). On farm composting hand book. N R A E S-54. Ithanaca, N.Y. North East Regional Aggricultural Engineering services.
Yousef, I.S., (2001). A study on mechanization of compost turning and mixing. Misr J., Ag. Eng., 18 (1) : 45-58. | ||||
Statistics Article View: 199 PDF Download: 140 |
||||