A COST ESTIMATION MODEL FOR MACHINING OPERATIONS; AN ANN PARAMETRIC APPROACH | ||||
| Journal of Al-Azhar University Engineering Sector | ||||
| Article 26, Volume 12, Issue 44, July 2017, Page 878-885 PDF (486.65 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/auej.2017.19195 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Mostafa R Atia1; Jean Khalil1; Mahmoud Mokhtar2 | ||||
| 1Mechatronics Dept., Faculty of Engineering, AASTMT, Cairo, Egypt. | ||||
| 2Higher Technological Institute Tenth of Ramadan City, Cairo, Egypt | ||||
| Abstract | ||||
| The estimation of machining cost is one of the most important factors in the industry of metal products machining. Many approaches exist for the pre-calculation of the cost of machining for metal made products; but these approaches vary in complexity, requirements and therefore in their own cost. In recent years, the need for a cost effective methodology that intend to estimate the cost of machining of a given product has become more and more obvious; especially when the product is produced in small quantities where the cost of the study has to be kept to a minimum. In job shop facilities, precise classical cost calculation is too difficult due to the varieties infiniteness of workpieces in terms of features and of dimensions. A common practice is to calculate the manufacturing cost of the workpiece as a function in the machining time; however, machining time calculation itself is a costly and lengthy operation. More recently, the parametric estimation method has been adapted as a shorter way for estimation machining cost and / or time. This method needs much experience within the field of manufacturing, which lays in the human factor namely the expert. The experts judgments involve two drawbacks, first, it requires a good deal of acquired information; second the judgments are subject to evolution with the experts development. In this paper, a new estimator based on the artificial neural network (ANN) is developed to replace both methods that relied either on the expert engineer or on the detailed process sheet for the assessment of machining time. The proposed tool uses the ANN to estimate the machining time using training cases, which are collected from real machining operations. The ANN input is a set of parameters related to the workpiece under consideration and to the specific cutting operation variables. The developed and trained ANN proved to be acceptably accurate in estimating the machining time of various case studies. | ||||
| Keywords | ||||
| parametric study; Cost Estimation; Machining operations; Artificial Neural Networks | ||||
|
Statistics Article View: 316 PDF Download: 1,246 |
||||
