A mercapto based nanoscavenger as promising tool for the dispersion preconcentration of trace elements in contaminated waters | ||||
| Egyptian Journal of Chemistry | ||||
| Article 3, Volume 65, Issue 3, March 2022, Page 29-38 PDF (280.6 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ejchem.2021.66064.3429 | ||||
 View on SCiNiTO | ||||
| Author | ||||
Mohammed Algaradah 
| ||||
| Chemistry, Science, King Khalid Military Academy, Riyadh, Saudi Arabia | ||||
| Abstract | ||||
| A novel chelating mercapto- nanoscavenger has been developed exploiting the high surface area of monodisperse nano-sized mesoporous silica. The nanoscavenger acts as a solid phase trace metal extractant whilst suspended as a quasi-stable sol in aqueous samples. This mode of extraction requires no external agitation as the particles move naturally through the sample by Brownian motion, convection and slow sedimentation. Careful size selection enables the nanoscavenger to be easily recovered together with the extracted analyte by conventional filtration or centrifugation. The paper describes the successful attachment of chelator mercapto to ca. 136 ± 15 nm high surface area (BET surface area = 1006 m2 g-1) mesoporous silica particles. The resulting material had a copper capacity of ca. 1.34 ± 0.10 mmol g-1 and was successfully applied to the collection of a trace element from water. Essentially complete recovery of Cu (II) has been achieved from freshwater samples giving typical preconcentration factors of 100 from 50 µg/l samples. Data obtained from a nanoscavenger-based extraction of copper from samples were not significantly different to those obtained by using a conventional colorimetric procedure employing complexation/solvent extraction. | ||||
| Keywords | ||||
| heavy metals; mesoporous silica; solid phase extraction; nanoscavenger | ||||
|
Statistics Article View: 311 PDF Download: 208 |
||||
