Design and implementation patch antenna with different fractal shape | ||||
| International Conference on Aerospace Sciences and Aviation Technology | ||||
| Article 31, Volume 18, Issue 18, April 2019, Page 1-8 PDF (841.39 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.1088/1757-899X/610/1/012029 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| A. M. M. A. Allam1; Mohamed Fathy Abo Sree2, 3; Muhammad Aly Ibrahim3 | ||||
| 1Faculty of Information Engineering and Technology German University in Cairo, Cairo, Egypt. | ||||
| 2Arab Academy for science, technology and maritime transportation, Sheraton, Cairo, Egypt.+ | ||||
| 3Ain Shams University ASU Faculty of engineering, Cairo, Egypt. | ||||
| Abstract | ||||
| This work presents the effect of fractal shapes on the patch antenna. It is a conventional rectangular patch antenna with dimension of 9.2 mm x 6.94 mm. It is implemented on FR-4 lossy substrate material with relative permittivity of εr = 4.3, thickness of 1.6 mm and loss tangent of 0.025. It is feed through a microstrip line with dimension of 6 mm x 3.11 mm. The overall dimension of the antenna is 35 mm x 30 mm x 1.6 mm. It operates over a frequency band from 8 GHz to 12 GHz with central frequency 10 GHz. Application of Pythagorean tree Sierpinski gasket, and Koch curve is to decrease the bandwidth and increase the gain of the designed antenna. The performance properties of the antenna such as resonant frequency, radiation pattern, and gain were examined by simulation. The design is implemented through CST microwave studio and measured through network analyser. | ||||
|
Statistics Article View: 34 PDF Download: 51 |
||||
