MANUFACTURE OF TOMATOES HALVING PROTOTYPE FOR NATURAL DRYING PROCESS | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 3, Volume 38, Issue 4, October 2021, Page 279-292 PDF (929.43 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2021.92428.1043 | ||||
 View on SCiNiTO | ||||
| Author | ||||
Wael A. Mahmoud  
| ||||
| Assist. Prof., Fac. of Ag. Eng., Al-Azhar U., Assiut Branch, Egypt. | ||||
| Abstract | ||||
| Tomatoes are an important component of the human diet but possess a very short post-harvest shelf-life which makes them highly perishable. This causes a problem in the transportation and handling of tomato fruits. The open natural sun drying of tomatoes in Upper Egypt is the best solution to this problem. Most processes of halving cutting tomatoes are manual, this process is a cumbersome, time-consuming, and labor-intensive job. So, this research aims to develop, fabricated, and evaluated the performance of halving cutting tomatoes prototype made with local materials, suitable for three cultivars (Nesma, Masa, and 2020) costumed for sun drying. The major components of the machine include the frame, the conveyor belt, cutting sow blade (smooth edge, inclined and straight teeth), electric motor, and power transmission system. The factors for evaluating performance of prototype included estimating the appropriate feeding rate, percentage of damage rate, cutting efficiency and productivity and calculating initial operating costs compared to manual halving costs. The results of the prototype performance evaluation showed that increasing the linear speed of the conveyor belt leads to decrease in productivity while decrease in cutting efficiency of the fruits. The best average productivity was achieved of highest cutting efficiency and least damage percentage at lowest linear speed of conveyor for three cultivars. The results also showed lower operating costs of the prototype at lowest linear speed of conveyor belt compared to manual cutting. Recommended that developing of this prototype to clean, dry and grade the fruits before halving. | ||||
| Keywords | ||||
| Tomatoes sun drying; Cutting machine; Machine productivity; Cutting efficiency | ||||
| References | ||||
|
Agbetoye, L. A., and Balogun, A. (2009). Design and Performance Evaluation of a Multi-Crop Slicing Machine. Proceedings of the 5th CIGR Section VI International Symposium on Food Processing, Monitoring Technology in Bioprocesses and Food Quality Management, Potsdam, Germany.
Ananth, K. N. S., Rakesh, V., and Visweswarao, P. K. (2013). Design and selecting the proper conveyor-belt. International Journal of Advanced Engineering Technology, 4(2): 43-49.
Bahaa Ismail. (2020). Guide to the production of sun-dried tomatoes. Food and Agriculture Organization of the United Nations. Cairo. Available at: <https://drive.google.com/file/d/1Khz7yaRQIvT8PfUX7vH16ta4IGzPns-0/edit? fbclid=IwAR35Y7I0zNJTvE1YFSavhAltFUdQvH6tF5VcSOc8Puf7u4gPgVCyu9NHou0>
FAO. (2020). World Food and Agriculture - Statistical Yearbook 2020. Available at: <http://www.fao.org/faostat/ar/#rankings/commodities_by_country>
Freed, R.S.P.; S.P. Eisensmith; S. Goetez; D. Reicosky; V.W. Smail and P. Wolberge (1989). Users guide to MSTAT-C.A software program for the design, moorage regimentand analyses of agronomic research experiments Michigan State University, U.S.A.
Gomez, K. A. and A. A. Gomez (1984). Statistical procedures for Agricultural Research 2nded. John Wiley and Sons, Inc. New York.
Hoeberichts, F. A., Van Der Plas, L. H., and Woltering, E. J. (2002). Ethylene perception is required for the expression of tomato ripening-related genes and associated physiological changes even at advanced stages of ripening. Postharvest Biology and Technology, 26(2): 125-133.
Kamaldeen O. S, Arowora K.A, Abioye J. S. and Awagu E. F., (2016). Modification of Manually Operated Tomato Slicing Machine. International Journal of Engineering Science and Computing. 6 (7): 1983-1938.
Kamaldeen O. S. and Awagu E. F., (2013). Design and development of a tomato manual slicing machine. International Journal of Engineering and Technology. 2 (1): 57-62.
Mahmoud, W. A., Mahmoud, R. K. and Eissa, A. S. (N. d.). Determining of some physical and mechanical properties for designing tomato fruits cutting machine. Agricultural Engineering International. CIGR Journal. Accepted submission and in preparation.
Ozumba, I. C., Ademade C. A., Jackson, B. A., and Adejumo O. A., (2004). Testing of National Centre for Agricultural Mechanization Treadle Cassava Grater. The 5th International Conference and 28th Annual general meeting of the Nigerian Institution of Agricultural Engineers, 26: 63 – 67.
Raji, O. A. and Igbeka, J. C. (1994). Pedal Operated Chipping and Slicing Machine for Tuber. Journal of Agricultural and Engineering Technology. 2: 90-99.
Shittu S. K., Bello M., and Dangora N. D. (2017) development of a motorized tomato (Solanumlycopersicum L.) slicer.Arid Zone Journal of Engineering, Technology and Environment, 13(2):197-208.
Taheri-Garavand, A., Ahmadi, H. and Gharibzahedi, S. M. T. (2009). Investigation of moisture-dependent physical and chemical properties of red lentil cultivated in Iran. In International Agricultural Engineering Conference (IAEC). Bangkok, Thailand: 7-10. | ||||
|
Statistics Article View: 491 PDF Download: 426 |
||||
