REMOVAL OF IRON FROM WATER USING HYDROGEN PEROXIDE | ||||
| Journal of Environmental Science | ||||
| Article 1, Volume 41, Issue 1, March 2018, Page 1-17 PDF (513.08 K) | ||||
| Document Type: Review Article | ||||
| DOI: 10.21608/jes.2018.20365 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Hewahy, M. A.1; Jahin, H. S2; Hesham, A. M | ||||
| 1Basic Sciences department, Institute of Environmental Studies and Research, Ain Shams University | ||||
| 2Central laboratory for Environmental Quality Monitoring, National Water Research Center. | ||||
| Abstract | ||||
| The presence of iron is probably the most common water problem facing by consumers. So, the aim of this study was to assess the efficacy of hydrogen peroxide to remove iron (Fe2+) from water. Water with high content of Fe2+ (20 ppm of iron II) was prepared in the laboratory using Iron(II) sulfate heptahydrate (FeSO4.7H2O), then treated with 0, 0.1, 1, 3, 5, 10 and 20 ppm of hydrogen peroxide as the final concentration in the solution for contact time 5, 10, 20, 30 and 60-minute. Results showed that the average of removal ratio of Fe2+ was 85%-96% at the normal pH range of drinking water. The recommended dose of hydrogen peroxide was 0.1 ppm as a final concentration for 20-minute contact time. The study proved that hydrogen peroxide successfully used for Iron II removal and consider as economic and eco-friendly solution. | ||||
|
Statistics Article View: 576 PDF Download: 319 |
||||
