Furniture renovation from the circular economy perspective (experimenting with decoupage technique) | ||||
| International Design Journal | ||||
| Article 29, Volume 12, Issue 2 - Serial Number 44, March and April 2022, Page 369-379 PDF (1.73 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.12816/idj.2022.222700 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| Amina Abdel-Gawad Abdel-Baky Emam | ||||
| Interior Design & Furniture Dept. -Faculty of Applied Arts- Benha University, | ||||
| Abstract | ||||
| A lot of furniture nowadays ends up in waste while it still has a functional value, many of the furniture products that are now discarded are still usable and can be used for many more years, however furniture is replaced mostly for aesthetic reasons, which represents a burden on the low-income, and makes it worth thinking about new ways to reduce the waste of furniture products, and with the global shift towards a circular economy, some organizations can recover the residual value of furniture products through renovation, by repairing them or re-manufacturing them and reselling them, and individuals can also recover the same value by reusing them again after being renovated. Research problem: The research problem is summarized in the high prices of new furniture for low-income people in the Arab Republic of Egypt, which leads to an economic burden on the user and prompts us to find solutions by answering the following question: - What is the impact of furniture renovation on the decrease in per capita consumption from a circular economy perspective? Objectives:: Providing new models for entrepreneurship and potential economically viable experiences that can be used in the Egyptian furniture industry to make it environmental and economically competitive. Converting used furniture into new furniture by treating it using decoupage technique, thus solving a large part of the problem, as this method saves approximately 5 times the cost of new furniture. Research importance: Environmental importance: Reducing the environmental problem caused by reuse of discarded furniture products. - Economic importance: taking advantage of the economic impact of the renewal process on the cost of production and then the price of the final product. Research assumes: - The concept of circular economy can be applied to furniture products in Egypt. - There are statistically significant differences between the samples that were implemented in achieving the economic, functional and aesthetic aspect, according to the users' opinions. Research sample: 1- 20 pieces of furniture that have been renovated using the decoupage style 3- 20 arbitrators (the users of refurbished furniture) - Research Methodology: - The descriptive and experimental method was used to reveal the effectiveness of the independent variable . Experiment Methodology - Reaching out to the sectors where furniture waste can be found, to which the circular economy concept can be applied through renewal. - Conducting experiments to renew these products with different methods of decoupage technique and reuse them. - Seeking the opinions of specialists and users in the result of the experiment. - Measuring the economic profitability of renewing and reusing. Results : The study found statistically significant differences between the samples that were implemented in achieving the economic, functional and aesthetic aspect, according to the users' opinions The best design in achieving the evaluation aspects (as a whole), according to the views of specialists and users was number five, and the lowest design achieved in the achievement of aspects of evaluation (as a whole),was design No. (12) | ||||
| Keywords | ||||
| Reuse - renewal; decoupage technique-sustainable development - circular economy | ||||
| References | ||||
|
1. Ahmed Galal - The economic limitations of environmental problems and the impact of sustainable development- Kingdom of Saudi Arabia - Dar Khaled Al-Mahyani for Publishing and Distribution 2. Ghada Refaat Ahmed Hassan 2021 - The effect of employing the electronic wall on developing students’ skills of stenciling and decoupage techniques and combining them - The Egyptian Journal of Home Economics - Volume 37 - Number 1 December 2021 3. Ismail Awad and others 2021 - The impact of the department on sustainable furniture design on achieving the maximum use of furniture - Journal of Architecture, Arts and Humanities - Volume V - Issue 24, 20 November 2021 4. Jaaro Truijens and Fahd Youssef–2018- Efficient logistics for Furniture Flows – PHd Degree Project – University of Gothenburg . 5. Ling Liu-(2013) The exploration of recycling design of furniture products based on Structure - Advanced Materials Research Vols 605-607 (2013) pp 44-48 © Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMR.605-607. 6. Linder,M.,& Williander,.(2015). Circuler Business Model Innovation: Inherent Uncertain. Business Strategy and Environment.- Industrial engineering -51(2)-279-287. 7. Michele Calabrese – 2013- Recycling Furniture: The Ecological, Economic and Social Benefits-Fordham University-Environmental Studies -DigitalResearch@Fordham 8. Sawalhi Akram and others 2020 The role of the circular economy in achieving sustainable development - PhD thesis - Faculty of Economic 9. Mohamed Boudiaf -2017 -REUSING AND RECYCLING PRACTI CE OF OLD FURNITURE IN DHAKA, CHITTAGONG AND MUNSHIGONJ- Proceedings of the WasteSafe 2017 – 5th International Conference on Solid Waste Management in South Asian Countries 25-27 February 2017, Khulna, Bangladesh United states international trade Commission (2012) Remanufacturing goods an overview of US and global industries markets and trade . USITC publications , 4356-332-525 | ||||
|
Statistics Article View: 243 PDF Download: 235 |
||||
