Effect of Chlorinated Water on Microhardness and Surface Roughness of Esthetic Restorative Materials: An in Vitro Study.
Soleman, A., Aboulatta, O., Abbdel-Samad, A., Abdel-Aziz Niazi, H. (2022). Effect of Chlorinated Water on Microhardness and Surface Roughness of Esthetic Restorative Materials: An in Vitro Study.. EKB Journal Management System, 34(1), 16-26. doi: 10.21608/bfemu.2022.223096
Abdel Monem Soleman; Ossama Aboulatta; Abdou Abbdel-Samad; Hanan Abdel-Aziz Niazi. "Effect of Chlorinated Water on Microhardness and Surface Roughness of Esthetic Restorative Materials: An in Vitro Study.". EKB Journal Management System, 34, 1, 2022, 16-26. doi: 10.21608/bfemu.2022.223096
Soleman, A., Aboulatta, O., Abbdel-Samad, A., Abdel-Aziz Niazi, H. (2022). 'Effect of Chlorinated Water on Microhardness and Surface Roughness of Esthetic Restorative Materials: An in Vitro Study.', EKB Journal Management System, 34(1), pp. 16-26. doi: 10.21608/bfemu.2022.223096
Soleman, A., Aboulatta, O., Abbdel-Samad, A., Abdel-Aziz Niazi, H. Effect of Chlorinated Water on Microhardness and Surface Roughness of Esthetic Restorative Materials: An in Vitro Study.. EKB Journal Management System, 2022; 34(1): 16-26. doi: 10.21608/bfemu.2022.223096

Effect of Chlorinated Water on Microhardness and Surface Roughness of Esthetic Restorative Materials: An in Vitro Study.

MEJ- Mansoura Engineering Journal
Article 13, Volume 34, Issue 1, March 2009, Page 16-26  XML PDF (6.81 MB)
Document Type: Research Studies
DOI: 10.21608/bfemu.2022.223096
View on SCiNiTO View on SCiNiTO
Authors
Abdel Monem Soleman* 1; Ossama Aboulattaorcid 2; Abdou Abbdel-Samad3; Hanan Abdel-Aziz Niazi4
1Demonstrator, Operative Dentistry Department, Faculty of Dentistry, Tanta University, Egypt.
2Associate Professor, Production Engineering and Mechanical Design Department, Faculty of Engineering, Mansoura University, 35516 Mansoura, Egypt.
3Associate Professor, Production and Mechanical Design Department, Faculty of Engineering, Mansoura University, 35516 Mansoura, Egypt.
4Professor, Operative Dentistry Department, Faculty of Dentistry, Ain Sham University, Egypt.
Abstract
Chlorine levels and pH - receive much attention in the swimming world as they determine whether the pool water will be people - friendly that are safe, comfortable and enjoyable for swimmers or causing irritation and negative effects on the body. Restorative material samples were prepared for testing microhardness and surface roughness. A total of 160 specimens were prepared for this study. They were divided into two main groups ( Composite and compomer ) each group 80 specimens. Each group was divided into four subgroups according to pH of chlorinated water ( 7.5, 6.5, 5.5 and 4.5 ) ( Slightly alkaline, slightly acidic, medium and highly acidic ) each group 20 specimens. Each group was further classified into two classes according to the frequency of immersion ( Regular = 2hours/day and intensive = 4hours/day ). Each class was divided according to the testing procedure ( Microhardness or surface roughness ) into two equal subclasses. The subgroup placed in pH 7.5 was used as a control as recommended by many investigators.
Microhardness and surface roughness of each specimen were tested before and one month after immersion in chlorinated water. From the results, it was found that there is a linear direct correlation between PH value and microhardness of the tested hybrid resin composite and compomer sample. A reverse linear correlation exists between PH values of chlorinated water and surface roughnssof hybrid composite and compomer; the lower the PH value the greater the surface roughness. The effect of PH of chlorinated water on surface roughness is more significant with hybrid composite than of compomer.
Keywords
Esthetic restorative; Chlorinated water; Surface roughness; Microhardness
Statistics
Article View: 70
PDF Download: 78