Study of the Effect of Adding A Blend of (Ethylene Vinyl Acetate: Styrene Butadiene Rubber) on the Rheological Properties of Asphaltic Materials | ||||
Egyptian Journal of Chemistry | ||||
Article 35, Volume 65, Issue 11, November 2022, Page 395-406 PDF (971.54 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/ejchem.2022.121325.5440 | ||||
View on SCiNiTO | ||||
Authors | ||||
Alaa Ali Hussein 1; Ammar Ahmed Hamdoon 2; Saad Salih Ahmed3; Haifaa Mubarak4; Mohanad Yakdhan Saleh 5 | ||||
1Department of Technology, Environmental College, University of Mosul | ||||
2University of Mosul – College of Education for pure science / Dep. of Chemistry-IRAQ | ||||
3Ministry of Education / Nineveh Education Direstorate | ||||
4Department chemical engineering , College of Engineering , University of Babylon, Iraq | ||||
5Department of Chemistry, College of Education for pure science, University of Mosul | ||||
Abstract | ||||
Obtaining asphalt with rheological properties is suitable for different uses, especially the field of paving that has become a concern of researchers. Thus, many researchers have been keen on modifying asphalt by various additives, particularly polymeric additives. In our study, we modify the rheological characteristics of asphalt using a polymeric mixture of ethylene vinyl acetate (EVA) with styrene-butadiene rubber (SBR). The above polymeric mixture is used with different weights of both polymers, so that the sum of both polymers is equal to one. Then, we added the polymeric mixture to the asphalt with different percentages in the presence of (0.5%) by weight of anhydrous aluminum chloride as a catalyst for this process at a constant temperature of (150) ° C for one hour . We made many measurements made on the modified samples in addition to the original asphalt, including the Ductility, Penetration and Softening Point as well as calculating the penetration index and the percentage of the separated asphaltens . The modified pathway produced many samples with excellent rheological properties. The selected samples that have a good rheological properties are suitable for climates in our country (Iraq) . If obtained Marshall values for modified asphalt are better than the original asphalt, this indicates greater stability and resistance to rattan as well as higher resistance to acid rain. | ||||
Keywords | ||||
Asphalt; Rheological properties; Ethylene vinyl acetate; styrene-butadiene rubber | ||||
Statistics Article View: 258 PDF Download: 142 |
||||