Preparation and Evaluation of Paint One and Two Shells Micro-capsules | ||||
| Egyptian Journal of Chemistry | ||||
| Article 9, Volume 62, Issue 5, May 2019, Page 885-896 PDF (5.45 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ejchem.2018.5286.1467 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Ahmed Ramadan1; Ahmed Adly Amer  2; Abdel aziz Gomaa3
| ||||
| 1Helwan university-faculty of science | ||||
| 2Ministry of military production | ||||
| 3Pacchin company- former head of quality sector | ||||
| Abstract | ||||
| There are two basic forms of micro-capsules, 1st form is covered by one shell made of urea-formaldehyde, while the 2nd one is covered by two shells (first one is urea-formaldehyde and the second one made of poly-urethane). Both forms are filled with two types of corrosion inhibitor (corr A and the other is corr B). Many tests are performed; Optical microscope scanning was applied to the micro-capsules in order to confirm the formation of capsules. Micro-capsules were weighed in order to measure the shrinking rate under heating of the micro-capsules. Infra-red spectroscopy was applied to make sure of the formation of shells of the micro-capsules. Physical properties were monitored weekly to confirm the stability of the micro-capsules. The purpose of preparing theses micro-capsules is to install a system of self-healing paints for corrosion protection. | ||||
| Keywords | ||||
| Micro-capsules – one shell – two shells – surfactant – shrinking time | ||||
|
Statistics Article View: 453 PDF Download: 421 |
||||
