Performance Analysis of a Helical Savonius Wind Turbine with Modified Rotor | ||||
| International Conference on Aerospace Sciences and Aviation Technology | ||||
| Article 33, Volume 17, AEROSPACE SCIENCES & AVIATION TECHNOLOGY, ASAT - 17 – April 11 - 13, 2017, April 2017, Page 1-14 PDF (1.3 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/asat.2017.22459 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Ahmed S. Saad1; Ali M. AbdelSalam2; I. M. Sakr2; W. A. El-Askary3 | ||||
| 1Demonstrator, Dept. of Mech. Power Eng., Faculty of Engineering, Shebin El-Kom, Menoufia University, Egypt. | ||||
| 2Assistant Professor, Faculty of Engineering, Shebin El-Kom, Menoufia University, Egypt. | ||||
| 3Professor, Faculty of Engineering, Shebin El-Kom, Menoufia University, Egypt. | ||||
| Abstract | ||||
| This study aims to investigate numerically the performance of a helical Savonius wind rotor with a twist angle of 45°. The twist is performed on a modified profile of the rotor blade. The power coefficient (Cp), the torque coefficient (CT), and the static torque coefficient (CTS) are computed under a constant aspect ratio of 1.0 and overlap ratio of 0.15. The numerical results presented in this paper are obtained using the three-dimensional incompressible unsteady Reynolds-Averaged Navier-Stokes equations along with the RNG k-ε turbulence model. A comparison between the present helical Savonius wind turbine of modified rotor and the helical Savonius wind turbine of conventional rotor shows better performance for the present modification. The maximum power coefficient and the maximum torque coefficient for the present helical modified rotor are 0.22 and 0.41, respectively. | ||||
| Keywords | ||||
| Numerical study; modified rotor; modified helical rotor with twist; maximum power coefficient | ||||
|
Statistics Article View: 268 PDF Download: 1,022 |
||||
