Kinematic Analysis of Delta Parallel Robot: Simulation Study | ||||
| Engineering Research Journal (Shoubra) | ||||
| Volume 49, Issue 1, July 2021, Page 25-35 PDF (1.39 MB) | ||||
| Document Type: Research articles | ||||
| DOI: 10.21608/erjsh.2021.226284 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| A. Eltayeb1, 2; S. Abdraboo1; M. Elsamanty1, 2 | ||||
| 1Faculty of Engineering at Shoubra, Benha University | ||||
| 2Smart Engineering Systems Research Center (SESC), Nile University | ||||
| Abstract | ||||
| This work is focused on the kinematic analyses and simulation of the Delta parallel robot. This robot is proposed in this study, which solves the forward kinematics by vector method. The half-angle formula is used to derive the inverse kinematics. The workspace of the Delta robot is presented dependent on the solution of forward kinematics. This parallel robot model was built in Solidworks and then imported into MATLAB/Simscape to do the simulation. The simulation represents the position and velocity of the moving plate, study the angular position and velocity of each joint. | ||||
| Keywords | ||||
| Delta Robot; Parallel Robot; kinematic simulation; and SimScape | ||||
|
Statistics Article View: 165 PDF Download: 375 |
||||
