Influence of Self Adhesion Mechanical and Physical Properties of Palm Trees Fibers - Polystyrene Composites | ||||
| Egyptian Journal of Chemistry | ||||
| Article 53, Volume 65, Issue 12, December 2022, Page 599-606 PDF (769.28 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ejchem.2022.123682.5524 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Laila Reda1; Lameas Mohamed2; Deia Ibrahim Moubarak   3
| ||||
| 1Department of Basic Science, Faculty of Engineering (Benha), Benha University, Benha, Egypt | ||||
| 2Sanitary and environmental institute, Housing and Building National Research center, Giza, Egypt | ||||
| 3Physics | ||||
| Abstract | ||||
| Polystyrene (PS) composites containing different concentrations of Palm Trees Fibers (PTF/PS) have been prepared by hot mixing process using Plasti Corder machine. PTF surface have been treated by PS solution to optimize the adhesion between PTF and PS in PTF/PS composite. The study of the abrasion, water absorption and the mechanical properties of the treated and untreated PTF/PS composites showed a significant improvement for the treated composites. The value of the modulus of the elasticity increased by the PS solution treatment from 1.1 GPa to 3.45 GPa for 60% fiber concentration in PTF/PS composites. | ||||
| Keywords | ||||
| palm trees fibers; polystyrene; adhesion; wood polymer composite | ||||
|
Statistics Article View: 324 PDF Download: 78 |
||||
