Damage Behavior of Glass Fiber Composite Laminates for Different Stacking Sequences under Impact Drop Weight | ||||
مجلة سوهاج لشباب الباحثين | ||||
Volume 2, Issue 2, 2022, Page 37-47 PDF (956.62 K) | ||||
Document Type: المقالة الأصلية | ||||
DOI: 10.21608/sjyr.2022.228706 | ||||
View on SCiNiTO | ||||
Authors | ||||
Ahmed Salama 1; Mohammed Abdellah2; Abo-El Hagag Seleem3; Mahmoud Salem4; Gamal Abdel-Jaber5 | ||||
1Mechanical Department, Faculty of Technology and Education, Sohag University, Sohag, 82524, Egypt | ||||
2Mechanical Engineering Department, South Valley University, Qena, Egypt 83523 | ||||
3Sun Miser petroleum company, Cairo, Egypt | ||||
4Mechanical Department, Faculty of Technology and Education, Sohag University, Sohag, Egypt 82524 | ||||
52Mechanical Engineering Department, South Valley University, Qena, Egypt 83523 | ||||
Abstract | ||||
Glass fiber composite laminates have attracted the interest of researchers all over the world due to their have outstanding applications in a lot of industrial fields. Toughness is a very important property in various applications. The current study gives a brief account of the effect of fiber orientation on the toughness of glass fiber composite laminates. Four different layups of stacking sequences [0] 4s, [0,90 ± 45] s, [0,90] 2s, and woven fabric are used. These laminates are manufactured using hand lay-up process technique. It is consisting of glass fiber as reinforcement material and epoxy as resin. Impact damage tolerance in composite laminates structures is a very active research topic. Drop weight impact test is applied to measure the depth of penetration through specimens’ surface, therefore, the effect of fallen load on the topography of the specimen and damage will be noticed. The impact strength is nearly given the same behavior for the four stacking sequences at lower drop velocities, but the woven fabric sample shows a lower penetration depth when the drop velocity increases. | ||||
Keywords | ||||
Composite material; Laminates; Fiber glass; Toughness | ||||
References | ||||
Abdellah, M. Y., Alsoufi, M. S., Hassan, M. K., Ghulman, H. A., & Mohamed, A. F. (2015). Extended finite element numerical analysis of scale effect in notched glass fiber reinforced epoxy composite. Archive of Mechanical Engineering, 62 (2), 217–236. https://doi.org/10.1515/meceng-2015-0013 Abdellah, M. Y., Hassan, M. K., Mohamed, A. F., & Backar, A. H. (2021). Cyclic relaxation, impact properties and fracture toughness of carbon and glass fiber reinforced composite laminates. Materials, 14(23). https://doi.org/10.3390/ma14237412 Agrawal, S., Singh, K. K., & Sarkar, P. K. (2014). Impact damage on fibre-reinforced polymer matrix composite - A review. Journal of Composite Materials, 48(3), 317–332. https://doi.org/10.1177/0021998312472217 Alharthi, H., Abdellah, M. Y., & Abdo, H. S. (2020). Size Effect and Fracture Toughness of Glass Fiber Composite Structures. 29 (May), 8567–8577. Azzi, V. D., & Tsai, S. W. (1965). Anisotropic strength of composites - Investigation aimed at developing a theory applicable to laminated as well as unidirectional composites, employing simple material properties derived from unidirectional specimens alone. Experimental Mechanics, 5 (9), 283–288. https://doi.org/10.1007/BF02326292 Baucom, J. N., & Zikry, M. A. (2005). Low-velocity impact damage progression in woven E-glass composite systems. Composites Part A: Applied Science and Manufacturing, 36 (5). https://doi.org/10.1016/j.compositesa.2004.07.008 Cole, J.-M. B. and M. (1999). Composite Materials: Mechanical Behavior and Structural Analysis. D3171, A. (2011). Standard Test Methods for Constituent Content of Composite Materials. ASTM International: West Conshohocken, PA, USA. Fathollah Taheri-Behrooz, Mahmood Shokrieh, H. A. (2013). Designing and manufacturing of a drop weight impact test machine. Engineering Solid Mechanics, 1 (2), 69–76. Fouad, H., Mourad, A. H. I., ALshammari, B. A., Hassan, M. K., Abdallah, M. Y., & Hashem, M. (2020). Fracture toughness, vibration modal analysis and viscoelastic behavior of Kevlar, glass, and carbon fiber/epoxy composites for dental-post applications. Journal of the Mechanical Behavior of Biomedical Materials, 101 (September 2020). https://doi.org/10.1016/j.jmbbm.2019.103456 Giovanni Belingardi, R. V. (2002). Low Velocity Impact Tests of Laminate Glass-Fiber-Epoxy Matrix Composite Material Plates. International Journal of Impact Engineering, 27 (2), 213–229. Hassan, M. K., Abdellah, M. Y., Azabi, S. K., & Marzouk, W. W. (2015). Investigation of the mechanical behavior of novel fiber metal laminates. International Journal of Mechanical and Mechatronics Engineering, 15 (3), 112–118. Hassan, M. K., Abdellah, M. Y., & Marzouk, W. W. (2015). Fracture Toughness of a Novel GLARE Composite Materia. International Journal of Engineering & Technology, IJET-IJENS, December. Jareteg, C., Wärmefjord, K., Cromvik, C., Söderberg, R., Lindkvist, L., Carlson, J., Larsson, S., & Edelvik, F. (2016). Geometry Assurance Integrating Process Variation with Simulation of Spring-In for Composite Parts and Assemblies. Journal of Computing and Information Science in Engineering, 16 (3). https://doi.org/10.1115/1.4033726 Jefferson Andrew, Sivakumar M. Srinivasan, A. Arokiarajan, H. N. D. (2019). Parameters influencing the impact response of fiber-reinforced polymer matrix composite materials: A critical review. Composite Structures, 224 (3), 111007. Liu, L., Zhang, B. M., Wang, D. F., & Wu, Z. J. (2006). Effects of cure cycles on void content and mechanical properties of composite laminates. Composite Structures, 73 (3), 303–309. https://doi.org/10.1016/j.compstruct.2005.02.001 Lu, N., Swan, R. H., & Ferguson, I. (2012). Composition, structure, and mechanical properties of hemp fiber reinforced composite with recycled high-density polyethylene matrix. Journal of Composite Materials, 46 (16), 1915–1924. https://doi.org/10.1177/0021998311427778 Mohamed K. Hassan, Abu El-Ainin H, A.-F. H. H.-F. (2013). Size Effect Analysis in Laminated Composite Structure using General Bilinear Fit. International Journal of Nonlinear Sciences and Numerical Simulation, 14 (34), 217–224. Mohammed Y. Abdellah, Mohamed K. Hassan, A.-F. H. (2014). Analytical Model to Predict Multiaxial Laminate Fracture Toughness From 0 degrees ply Fracture Toughness. Polymer Engineering and Science, 54 (1), 234–238. Mohammed Y. Abdellah, Sulaiman S. Al Swailem, Ahmed Fathi Mohamed, Moataz Gomma, G. A.-J. (2019). Relaxation, Impact and Flexural Properties of Glass Fiber Reinforced EpoxyNo Title. International Journal of Mechanical & Mechatronics Engineering, 19 (5), 126–231. Mohammed, Y., Hassan, M. K., El-Ainin, H. A., & Hashem, A. M. (2014). Effect of stacking sequence and geometric scaling on the brittleness number of glass fiber composite laminate with stress raiser. Science and Engineering of Composite Materials, 21 (2), 281–288. https://doi.org/10.1515/secm-2013-0038 Mohammed, Y., Hassan, M. K., El-Ainin, H. A., & Hashem, A. M. (2015). Size effect analysis of open-hole glass fiber composite laminate using two-parameter cohesive laws. Acta Mechanica, 226 (4), 1027–1044. https://doi.org/10.1007/s00707-014-1150-0 Obaid, N., Kortschot, M. T., & Sain, M. (2017). Understanding the stress relaxation behavior of polymers reinforced with short elastic fibers. Materials, 10 (5), 1–15. https://doi.org/10.3390/ma10050472 Shah, S. Z. H., Karuppanan, S., Megat-Yusoff, P. S. M., & Sajid, Z. (2019). Impact resistance and damage tolerance of fiber reinforced composites: A review. Composite Structures, 217 (March), 100–121. https://doi.org/10.1016/j.compstruct.2019.03.021 Tian Ouyang, Wei Sun, Rui Bao, R. T. (2021). Effects of matrix cracks on delamination of composite laminates subjected to low-velocity impact. Composite Structures, 262, 113354. Tien-WeiShyr, Y.-H. (2003). Impact Resistance and Damage Characteristics of Composite Laminates. Composite Structures, 62 (2), 193–203. van Hoorn, N., Kassapoglou, C., Turteltaub, S., & van den Brink, W. (2022). Experimental damage tolerance evaluation of thick fabric carbon/epoxy laminates under low-velocity and high-velocity impact and compression-after-impact. Journal of Composite Materials, 56 (5), 761–778. https://doi.org/10.1177/00219983211060501 W.J. Cantwell, J. M. (1991). The impact resistance of composite materials: a review. Composites, 22 (5), 347–362. | ||||
Statistics Article View: 123 PDF Download: 75 |
||||