DEVELOPING AND EVALUATING A MULTI NOZZLE SPRAYING MACHINE POWERED BY SOLAR ENERGY FOR AGRICULTURAL SMALLHOLDINGS | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 1, Volume 39, Issue 3, July 2022, Page 353-374 PDF (2.27 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2022.131876.1070 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Abdellateif A. Samak   1; Mohamed N. Omar1; Said F. Elsisi2
| ||||
| 1Assoc. Prof., Ag. and Biosystem Eng. Dept. Fac. of Ag., Menoufia U., Shebin EL-Kom, Egypt. | ||||
| 2Assist. Prof., Ag. and Biosystem Eng. Dept., Fac. of Ag., Menoufia U., Shebin EL-Kom, Egypt. | ||||
| Abstract | ||||
| The general objective of this study is to develop and assess the performance of a moving machine, energy battery, and pumping mechanism intended for a solar energy-powered spraying machine. To achieve this aim, a spraying machine was developed and evaluated powered by solar energy via a flexible solar panel system. The development and evaluation process of the spraying machine was done in different steps. The first step was to build and develop the portable unit with remote control unit and the power system. In the second step, the spraying system was hydraulically evaluated under different nozzle types (the full-cone and the Hollow-cone), and nozzle heights by measuring the nozzle distribution efficiency and CV. The third step was to evaluate the spraying machine unit under field conditions. The results of hydraulic evaluation affirmed that, the greatest worth of distribution efficiency was 68.09% with CV% of 3.7% under 60 cm nozzle height and the Hollow-cone single nozzle. The obtained results from the solar panel system showed that, the maximum irradiance was 7783 W m-2day-1 in the summer. The theoretical performance rate was 0.25 (ha h-1) with the operation width of 0.75m and machine velocity of one m s-1. The daily theoretical performance rate was 1.82, 1.5, and 1.1 ha day-1. The actual daily performance rate in the spring season was 1.2 ha day-1 with 80% of the machine field efficiency. Therefore, the energy produced from solar panels could a good alternative source for the energy consumption in the smallholding’s agricultural machines. | ||||
| Keywords | ||||
| Solar energy; Spraying machine; Smallholdings; Machinery | ||||
| References | ||||
|
Ahalya M, Muktha A., Veena M., Vidyashree G., and Rehna V.J., (2017). Solar Powered Semi-Automatic Pesticide Sprayer for use in Vineyards. SSRG International Journal of Electronics and Communication Engineering (SSRG- IJECE), volume 4(4), pp-54-57, ISSN:2348-8549.
Akshay M.N. and Waghmare, G., (2016). Design and fabrication of solar operated sprayer for agricultural purpose. National Conference on Innovative Trends in Science and Engineering, Vol. 4 (7): 104-107.
Cuadros F., Rodruıguez L.F., and Marcos A., Coello J. (2004). A procedure to size solar-powered irrigation (photo irrigation) schemes. Solar Energy 2004; 76(4):465–473.
Dhete R. D., Nitin Das, Namit Maske, Vinayak Khawas, and S. K. Chaudhary, (2015). Agricultural Fertilizers and Pesticides Sprayers- A Review, IJIRST – International Journal for Innovative Research in Science and Technology, Volume 1 (11): 44-47.
Forney S.H., Luck JD, Kocher MF, and Pitla SK, (2017). Laboratory and full boom-based investigation of nozzle setup error effects on flow, pressure, and spray pattern distribution. Appl. Eng. Agric. 33 (5):641–653.
Gaodi, M.A., Lonkar, A.S., Wankhede, A.S. and Gandate, S.D., (2016). development of multipurpose sprayer-a review. International Research Journal of Engineering and Technology (IRJET), 3 (3): 540-542
Issa, W.A, (2020). Design, fabrication, and testing of a movable solar operated sprayer for farming operation, International Journal of Mechanical Engineering and Technology (IJMET), 11 (03): pp. 6-14.
Joshua R., Vasu V and Vincent P., (2010). Solar Sprayer - An Agriculture Implement. International Journal of Sustainable Agriculture, 2 (1): 16-19.
Krishna M.B., Rajan K., Indrajeet Y., and Vishnu D., (2017). Solar Pesticide Sprayer. International Journal of Latest Engineering Research and Applications (IJLERA), Volume – 02 (5): PP – 82-89.
Krishnan P., Williams T.H., and Kemble L.J., (1988). Spray pattern displacement measurement technique for agricultural nozzles using spray table, Transactions of the ASAE, 31 (2): 386–389.
kumar B. P., D. P. Winstona, P. Pounrajb, A. M. Manokarc, R. Sathyamurthyd, and A.E. Kabeelf., (2018). Experimental investigation on hybrid PV/T active solar still with effective heating and cover cooling method. Desalination, volume 435 (1): 140-151. http://dx.doi.org/10.1016/j.desal.2017.11.007
Kumar, K.P., Akilan, S., Gobinath, M., Gowtham, D. and Guruprasath, M., (2019). Design and Fabrication of Portable Solar Operated Chemical Sprayer. International Journal of Research in Engineering. Science and Management, 2 (2): 71-72.
Kumar, K.S., Tejasri, A., Srinivas, M., Suresh, V., Kumar, A.P. and Kumar, D.P., (2020). pesticides solar sprayer with charge controller for agriculture needs. Journal of Engineering Science, 11(5): 583-585.
Malatesh D, Manjunath H, Nilakanth D, and Mallikarjun P, (2017). Solar Powered Sprayer for Agricultural and Domestic Purpose, International Journal of Research in Engineering and Science (IJRES), volume 5 (6): PP. 32-35.
Omar M.N., A.T. Taha, A.A. Samak, M.H. Keshek, E.M. Gomaa, and S.F. Elsisi, (2021). Simulation and validation model of cooling greenhouse by solar energy (P V) integrated with painting its cover and its effect on the cucumber production. Renewable Energy 172 (July 2021) 1154-1173, https://doi.org/10.1016/j.renene.2021.03.092.
Ozkan HE, Reichard DL, and Ackerman KD, (1992). Effect of orifice wear on spray patterns from fan nozzles. Transactions of the ASAE 35 (4):1091–1096.
Poratkar, S.H. and D.R. Raut, (2013). Development of Multi nozzle Pesticides Sprayer Pump. International Journal of Modern Engineering Research (IJMER), Vol.3 (2): pp-864-868.
Pratt, Alejandro Nin, Hagar ElDidi, and Clemens Breisinger (2018). Farm Households in Egypt: A typology for assessing vulnerability to climate change. regional program (working paper 12, page 10-11, September 2018).
Ruiz J., P. Martínez, H. Sadafi, F.J. Aguilar, P.G. Vicente, M. Lucas, (2020). Experimental characterization of a photovoltaic solar-driven cooling system based on an evaporative chimney. Renewable Energy 161 (December 2020) 43 – 54. https://doi.org/10.1016/j.renene.2020.06.111
Samuel Gan-Mor; and Graham A. Matthews, (2012). Recent Developments in Sprayers for Application of Biopesticides -an Overview, Biosystems Engineering, Volume 84(2): 119-125, ISSN 1537-5110.
Sanjay.S, Sridhar.R, Syed Moinudeen.T, and Harshitha.V, (2015). “Design and Fabrication of Mechanical Pest Sprayer”, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), volume 4(10): 194-197, ISSN: 2319-8753.
Siebe A and Luck JD, (2016). Height and pressure test for improving spray application, UCARE Res Prod 129, 2016. http://digitalcommons.unl.edu/ucareresearch/129.
UCTEA, (2011). The Union of the Chambers of Turkish Engineers and Architects. http://www.zmo.org.tr/konular/index.php?kod=111 [accessed 2011].
Vern Hofman and Elton Solseng (2018). Spray Equipment and Calibration. Agricultural and Biosystems Engineering, North Dakota State University NDSU, 2018. https://www.ag.ndsu.edu/publications/crops/spray-equipment-and-calibration.
Vinay Swami1, Dipesh Kumar Chauhan, Priyabrata Santra and Kartik Kothari, (2016). Design and Development of Solar PV based Power Sprayer for Agricultural, Annals of Arid Zone (2016), 55(1&2): 51-57. https://www.researchgate.net/publication/312313477
Vipul Jhod, Akshay Jumle, Saurabh Apte, and Ninad Borkar (2016). “Self-Powered Pesto- Sprayer”, International Journal of Mechanical Engineering and Technology (IJMET), volume 7(2): 300-306. | ||||
|
Statistics Article View: 723 PDF Download: 799 |
||||
