Performance of Reinforced Engineered Cementitious Composite Beams | ||||
Engineering Research Journal (Shoubra) | ||||
Volume 51, Issue 2, April 2022, Page 83-101 PDF (1.44 MB) | ||||
Document Type: Research articles | ||||
DOI: 10.21608/erjsh.2022.235468 | ||||
View on SCiNiTO | ||||
Authors | ||||
Osama O. El-Mahdy1; Gehan A. Hamdy1; Mosaad H. El-Diasity2; Yousry Shalaby3 | ||||
1Professor of Structural Analysis, Faculty of Engineering at Shoubra, Benha University. | ||||
2Assistant Professor, Faculty of Engineering at Shoubra, Benha University. | ||||
3Teaching Assistant, Faculty of Engineering at Shoubra, Benha University. | ||||
Abstract | ||||
Engineered Cementitious Composite (ECC) was recently developed and was reported to improve the strength, damage tolerance, ductility, energy dissipation capacity, and durability of components when compared to conventional reinforced concrete. A polyvinyl alcohol fiber reinforced engineered cementitious composite (PVA-ECC) using local ingredients – namely local sand instead of using microsilica sand – was developed, aiming for tensile strain capacity matching that of steel reinforcement for commonly used reinforced concrete structures while reducing the cost. The main objectives of this research are to develop and validate a procedure for numerical modeling and structural analysis of PVA-ECC beams using local sand. Also, the research aims to study the effects of several parameters on the flexural and shear behaviors of PVA-ECC beams. The results of numerical study indicated that the PVA-ECC beams have excellent shear capacity that helps in decreasing shear reinforcement congestion in structural elements. Consequently, PVA-ECC with local sand is very useful for structural elements to resist seismic loads. Furthermore, the peak load is increased with increasing of longitudinal reinforcement ratio (µ) and with increasing of yielding stress. On the other hand, the peak load is decreased with increase of shear span-to-depth ratio (S/d) and the mid-span deflection at peak load is increased with the increasing of S/d in all cases. The stiffness of PVA-ECC is decreased with increasing of S/d and is slightly increased with increasing of µ values. Also, there are minor differences in stiffness when yielding stress of steel reinforcement is changed. | ||||
Keywords | ||||
Structural Behavior; Beams; Polyvinyl Alcohol Fiber (PVA); Engineered Cementitious Composites (ECC); Numerical Modeling | ||||
Statistics Article View: 210 PDF Download: 309 |
||||