Hydroxyapatite/ Chitosan Coating By Electrophoretic Deposition on SS 316L For Biomedical Application | ||||
| Egyptian Journal of Chemistry | ||||
| Volume 65, Issue 132, December 2022, Page 339-346 PDF (562.86 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ejchem.2022.126733.5624 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Israa Zuhair Ahmed  1; Hussein Jaber2; Shayma Salih3
| ||||
| 1Msc. Student, material engineering department, University of Technology, Iraq- Baghdad | ||||
| 2Material Engineering Department, University of Technology, Baghdad | ||||
| 3Material Engineering Department, University of Technology, Baghdad, | ||||
| Abstract | ||||
| Abstract.316L stainless steel was coated with Hydroxyapatite-chitosan (HAP-CS) using a pulsed electrophoretic deposition (PEPD) technique at a constant voltage (30 V) and frequency (50 Hz).The deposited coatings were analyzed using X-ray diffraction spectroscopy (XRD) ,micro roughness test, and scanning electron microscope (SEM), as well as, the Zeta potential for suspensions were calculated. In this paper was studied the characterization of the chitosan – hydroxyapatite coating on the 316L Stainless Steel. | ||||
| Keywords | ||||
| Hydroxyapatit; Chitosan; Electrophoretic; Biomedical Application | ||||
|
Statistics Article View: 272 PDF Download: 133 |
||||
