Improving Some Properties of Medical Clothing (Surgical Gowns) by Using Carbon Fibers and Other Treatment | ||||
| Journal of Design Sciences and Applied Arts | ||||
| Article 7, Volume 3, Issue 2, June 2022, Page 104-111 PDF (420.68 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/jdsaa.2022.122980.1161 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
hazem katry  1; Sayed Elshahat Ismail2
| ||||
| 1Faculty of Education - Helwan university | ||||
| 2Director of Readymade Garments Department at the General Administration for Textile Tests of the Egyptian General Authority for Standardization and Quality | ||||
| Abstract | ||||
| Textiles have been used in the medical field since ancient times, so it is not new. This and with the technological development has led to the emergence of a new branch known as medical textiles, which falls under the branch of technical fabrics. The most common forms of textile use in the medical fields are the making of patient bedspreads, hospital and intensive care room curtains, health care workers' clothing (surgical gowns, face masks, headgear and shoes), suture anchors, sterilization rolls, molded fibers and braces / or those. The purpose of this study is to use carbon fibers in medical clothes (surgical gowns) and to make a difference in the fabrics composition as well as the nature of the fibers with the addition of some other treatments and a comparison between them and the normal surgical gowns. It was found through the results that the treated fabrics outperformed the fabrics of ordinary surgical gowns in terms of durability represented ( tensile strength), bacteria resistance, fluid permeability resistance and more resistance to wetness. However, it was higher resistance to air permeability. | ||||
| Keywords | ||||
| Medical clothes; Carbon Fibers; Surgical gowns; Antimicrobial; Fluids Penetration | ||||
|
Statistics Article View: 266 PDF Download: 355 |
||||
