Assessment of seismic vulnerability of RC frames at the end-of-row of buildings with floor-to-floor alignment using multi-strips analysis MSA

[1]        Mohamed, H., G. Elyamany, and K. Ehab, Seismic pounding between adjacent building: a review. Academic Platform Journal of Natural Hazards and Disaster Management, 2021: p. 16-28.

[2]        Mohamed, H. and X. Romão, Seismic Fragility Functions for Non-Seismically Designed RC Structures Considering Pounding Effects. Buildings, 2021. 11(12): p. 665.

[3]        Kazemi, F., B. Mohebi, and R. Jankowski, Predicting the seismic collapse capacity of adjacent SMRFs retrofitted with fluid viscous dampers in pounding condition. Mechanical Systems and Signal Processing, 2021. 161: p. 107939.

[4]        Cole, G.L., R.P. Dhakal, and F.M. Turner, Building pounding damage observed in the 2011 Christchurch earthquake. Earthquake Engineering & Structural Dynamics, 2012. 41(5): p. 893-913.

[5]        Shrestha, B. and H. Hao, Building Pounding Damages Observed during the 2015 Gorkha Earthquake. Journal of Performance of Constructed Facilities, 2018. 32(2): p. 04018006.

[6]        Sołtysik, B. and R. Jankowski, Building damage due to structural pounding during earthquakes. Journal of Physics: Conference Series, 2015. 628(1): p. 012040.

[7]        Kharazian, A. and F. López-Almansa, State-of-the-Art of Research on Seismic Pounding Between Buildings with Aligned Slabs. Archives of Computational Methods in Engineering, 2019. 26(2): p. 327-345.

[8]        Raheem, S.E.A., et al., Seismic pounding effects on adjacent buildings in series with different alignment configurations. Steel and Composite Structures, 2018. 28(3): p. 289-308.

[9]        Raheem Shehata, E.A., et al., Seismic pounding between adjacent buildings considering soil-structure interaction. Earthquakes and Structures, 2021. 20(1): p. 55-70.

[10]      Miari, M., K.K. Choong, and R. Jankowski, Seismic pounding between adjacent buildings: Identification of parameters, soil interaction issues and mitigation measures. Soil Dynamics and Earthquake Engineering, 2019. 121: p. 135-150.

[11]      Miari, M., K.K. Choong, and R. Jankowski, Seismic Pounding Between Bridge Segments: A State-of-the-Art Review. Archives of Computational Methods in Engineering, 2021. 28(2): p. 495-504.

[12]      Khatami, S.M., et al., An ANN-Based Approach for Prediction of Sufficient Seismic Gap between Adjacent Buildings Prone to Earthquake-Induced Pounding. Applied Sciences, 2020. 10(10): p. 3591.

[13]      Khatami, S.M., et al., Verification of Formulas for Periods of Adjacent Buildings Used to Assess Minimum Separation Gap Preventing Structural Pounding during Earthquakes. Advances in Civil Engineering, 2019. 2019: p. 9714939.

[14]      Favvata, M.J., Minimum required separation gap for adjacent RC frames with potential inter-story seismic pounding. Engineering Structures, 2017. 152(Supplement C): p. 643-659.

[15]      Cole, G., et al., Building pounding state of the art: Identifying structures vulnerable to pounding damage, in NZSEE Conference. 2010, New Zealand Society for Earthquake Engineering Inc.: New Zealand.

[16]      Jeng, V. and W.L. Tzeng, Assessment of seismic pounding hazard for Taipei City. Engineering Structures, 2000. 22(5): p. 459-471.

[17]      EC201, Egyptian Code for Calculating Loads and Forces in Structural Work and Masonry (Code N 201–Ministerial Decision 431/2011). 2012 (in Arabic), Housing and Building National Research Center (HBRC) Ministry of Housing, Utilities and Urban Planning

[18]      EC-203, Egyptian Code for the Design and Construction of Concrete Structures. 2017.

[19]      McKenna, F., G. Fenves, and M. Scott. Open system for earthquake engineering simulation. University of California, Berkeley, Ca 2000; Available from: http://OpenSees.berkeley.edu.

[20]      Mondal, G. and S.K. Jain, Lateral stiffness of masonry infilled reinforced concrete (RC) frames with central opening. Earthquake Spectra, 2008. 24(3): p. 701-723.

[21]      Scott, M.H. and K.L. Ryan, Moment-Rotation Behavior of Force-Based Plastic Hinge Elements. Earthquake Spectra, 2013. 29(2): p. 597-607.

[22]      Scott, M. and G. Fenves, Plastic Hinge Integration Methods for Force-Based Beam–Column Elements. Journal of Structural Engineering, 2006. 32(2): p. 244-252.

[23]      Fragiadakis, M. and M. Papadrakakis, Modeling, analysis and reliability of seismically excited structures: computational issues. International journal of computational methods, 2008. 5(04): p. 483-511.

[24]      Kent, D.C. and R. Park, Flexural members with confined concrete. Journal of the Structural Division, 1971. 97(7): p. 1969-1990.

[25]      Menegotto, M. and P. Pinto. Method of Analysis for Cyclically Loaded RC Frames Including Changes in Geometry and Non-elastic Behaviour of Elements Under Combined Normal Force and Bending. in Proc., Iabse Symp. Of Resistance and Ultimate Deformability of Structures Acted on by Welldefined Repeated Loads. 1973. Libson, Portugal: International Association of Bridge and Structural Engineering.

[26]      Filippou, F.C., E.P. Popov, and V.V. Bertero, Effects of bond deterioration on hysteretic behavior of reinforced concrete joints. 1983.

[27]      Mohamed, H. and X. Romão, Analysis of the performance of strut models to simulate the seismic behaviour of masonry infills in partially infilled RC frames. Engineering Structures, 2020. 222: p. 111124.

[28]      Mohamed, H. and X. Romão, Robust Calibration of Macro-Models for the In-Plane Behavior of Masonry Infilled RC Frames. Journal of Earthquake Engineering, 2018: p. 1-27.

[29]      Mohamed, H. and X. Romão. Simplified modelling of in-plane behaviour of masonry infilled RC frames under seismic loading:  advantages and barriers. in The 16th European Conference on Earthquake Engineering. 2018. Thessaloniki, Greece.

[30]      Anagnostopoulos, S.A., Pounding of buildings in series during earthquakes. Earthquake Engineering & Structural Dynamics, 1988. 16(3): p. 443-456.

[31]      Muthukumar, S. and R. DesRoches, A Hertz contact model with non-linear damping for pounding simulation. Earthquake Engineering & Structural Dynamics, 2006. 35(7): p. 811-828.

[32]      Azevedo, J. and R. Bento. Design criteria for buildings subjected to pounding. in Eleventh World Conference on Earthquake Engineering, Acapulco, Mexico. 1996.

[33]      Mackie, K.R. and B. Stojadinović, Comparison of Incremental Dynamic, Cloud, and Stripe Methods for Computing Probabilistic Seismic Demand Models. Structures Congress 2005: p. 1-11.

[34]      Scozzese, F., E. Tubaldi, and A. Dall’Asta, Assessment of the effectiveness of Multiple-Stripe Analysis by using a stochastic earthquake input model. Bulletin of Earthquake Engineering, 2020. 18(7): p. 3167-3203.

[35]      Bradley, B.A., Practice-oriented estimation of the seismic demand hazard using ground motions at few intensity levels. Earthquake Engineering & Structural Dynamics, 2013: p. n/a-n/a.

[36]      Araújo, M., et al., Code‐based record selection methods for seismic performance assessment of buildings. Earthquake Engineering & Structural Dynamics, 2016. 45(1): p. 129-148.

[37]      Martins, L. and V. Silva. A global database of vulnerability models for seismic risk assessment. in 16th European conference on earthquake engineering. Thessaloniki, Greece. 2018.

[38]      Mohamed, H. and X. Romão. Seismic fragility analysis of RC frames with masonry infills. in 16ECEE. 2018. Thessaloniki, Greece.

[39]      FEMA-273, NEHRP Guidelines for the seismic rehabilitation of buildings, in Federal Emergency Management Agency. 1997: Washigton D.C., Maryland, USA.

[40]      Rossetto, T. and A. Elnashai, Derivation of vulnerability functions for European-type RC structures based on observational data. Engineering Structures, 2003. 25(10): p. 1241-1263.

[41]      Ghobarah, A. On drift limits with different damage levels. in Proceedings of International Workshop on Performance-Based Seismic Design Concepts and Implementation, June 28th–July 1st. 2004.

[42]      Rossetto, T. and A. Elnashai, A new analytical procedure for the derivation of displacement-based vulnerability curves for populations of RC structures. Engineering Structures, 2005. 27(3): p. 397-409.

[43]      Vamvatsikos, D. and C.A. Cornell, Developing efficient scalar and vector intensity measures for IDA capacity estimation by incorporating elastic spectral shape information. Earthquake Engineering & Structural Dynamics, 2005. 34(13): p. 1573-1600.

[44]      Aschheim, M., E. Hernández-Montes, and D. Vamvatsikos, Design of Reinforced Concrete Buildings for Seismic Performance: Practical Deterministic and Probabilistic Approaches. 2019: Crc Press.

[45]      Mohamed, H., Seismic risk assessment of reinforced concrete frames with masonry infill, in Civil Engineering Department. 2017, University of Porto: Porto.