THE INFLUENCE OF THE SURFACE ROUGHNESS ON THE ROLL BONDING INTERFACE OF 6061 ALUMINUM ALLOY PLATES | ||||
| International Conference on Aerospace Sciences and Aviation Technology | ||||
| Article 23, Volume 10, 10th International Conference On Aerospace Sciences & Aviation Technology, May 2003, Page 333-342 PDF (1.6 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/asat.2013.24433 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| ELSEAIDY M. I.1; GHONEIM. M. M.2; IBRAHIM M. M.3 | ||||
| 1Metallurgist Engineer, ETRR-2, Nuclear Research Center, Atomic Energy Authority, Inshas 13759, Cairo, Egypt. | ||||
| 2Professor, Metallurgy Department, Nuclear Research Center, Atomic Energy Authority, ETRR-2, Inshas 13759, Cairo, Egypt. | ||||
| 3Professor, Metallurgy Department , Faculty of Engineering, Cairo University, Giza, Egypt. | ||||
| Abstract | ||||
| Roil Bonding process is applied to clad the core plate (U308+Al), with high strength aluminum alloys during fabrication of plate type nuclear fuel elements for research reactors, or to produce many new constructions which have special uses in industrial applications. In the present work the effect of the surface roughness of 6061 aluminum alloy plates on roll bonding interface was studied using both microscopic examination and mechanical testing. It was found that the bond strength reached a maximum value at surface roughness of about 5 21_1.m. The bond strength decreases rapidly with both decreasing or increasing the surface roughness than 5.2 um. The increase of the surface roughness resulted in the blistering area increase. | ||||
| Keywords | ||||
| Nuclear Fuel; Research Reactors; Roll Bonding; Solid State Welding; Metal Cladding; 6061 Aluminum Alloy | ||||
|
Statistics Article View: 131 PDF Download: 248 |
||||
