Stability and Volumetric Properties of Hot - Mixes Asphalt (HMA) Using Marble Powder Waste
Eissa, M., Shalaby, B., Mashaly, O., Abdeldayem, A., Mosa, G. (2022). Stability and Volumetric Properties of Hot - Mixes Asphalt (HMA) Using Marble Powder Waste. EKB Journal Management System, 4(2), 40-48. doi: 10.21608/jisse.2022.138055.1057
Mahmoud Eissa; Basel Shalaby; Osama Mashaly; Abdelaziz Abdeldayem; Gamal Said Mosa. "Stability and Volumetric Properties of Hot - Mixes Asphalt (HMA) Using Marble Powder Waste". EKB Journal Management System, 4, 2, 2022, 40-48. doi: 10.21608/jisse.2022.138055.1057
Eissa, M., Shalaby, B., Mashaly, O., Abdeldayem, A., Mosa, G. (2022). 'Stability and Volumetric Properties of Hot - Mixes Asphalt (HMA) Using Marble Powder Waste', EKB Journal Management System, 4(2), pp. 40-48. doi: 10.21608/jisse.2022.138055.1057
Eissa, M., Shalaby, B., Mashaly, O., Abdeldayem, A., Mosa, G. Stability and Volumetric Properties of Hot - Mixes Asphalt (HMA) Using Marble Powder Waste. EKB Journal Management System, 2022; 4(2): 40-48. doi: 10.21608/jisse.2022.138055.1057

Stability and Volumetric Properties of Hot - Mixes Asphalt (HMA) Using Marble Powder Waste

Journal of International Society for Science and Engineering
Volume 4, Issue 2, June 2022, Page 40-48  XML PDF (431.56 K)
Document Type: Original Article
DOI: 10.21608/jisse.2022.138055.1057
View on SCiNiTO View on SCiNiTO
Authors
Mahmoud Eissa email 1; Basel Shalaby2; Osama Mashaly3; Abdelaziz Abdeldayem4; Gamal Said Mosa5
1Geology Department, Faculty of Science, Tanta University, Tanta, Egypt
2Geological sciences department, national research centre, Egypt
3Geological sciences department, National research centre, Egypt
4Geology department, Faculty of science, Tanta University, Tanta, Egypt
5Geology department, faculty of science, Tanta University, Tanta, Egypt
Abstract
The current study aims to evaluate the performance of hot mix asphalt (HMA) in terms of physical and mechanical properties using marble powder waste (MPW) as a substituting material for bag-house mineral filler. The marble powder waste is the by-product of the sawing and polishing processes of marble blocks that represent about 25-30% of the block volume. The marble wastes were characterized in terms of chemical composition, particle size distribution, and specific surface area using X-ray fluorescence (XRF), BT, and BET; respectively.

To achieve the above objective, five asphalt mixes were prepared according to Marshal Mix Design procedure, using 0% (control mix), 25%, 50%, 75%, and 100% marble powder as a bag-house mineral filler replacement. The prepared asphalt mixes were subjected to the Marshall tests in terms of stability, flow, bulk specific gravity (Gmb), air voids (Va), void in mineral aggregates (VMA), and void filled with asphalt (VFA), in addition to the loss of stability (LOS). The results showed that there is an increase in the stability of asphalt mixes with increasing the (MPW). In the same line, the loss of stability decreased drastically with the addition of (MPW). Moreover, the results of flow, air voids, voids of mineral aggregate, and voids filled with asphalt achieved the requirements of the Egyptian Code of Practice specification (ECP) for binder mix.
Keywords
Hot - Mix Asphalt; Marble Powder Waste; Filler; Volumetric properties; Marshall Stability
Statistics
Article View: 151
PDF Download: 110