An Overview of Carpet Manufacture: Design, Dyeing, Printing and Finishing | ||||
| Journal of Textiles, Coloration and Polymer Science | ||||
| Volume 19, Issue 2, September 2022, Page 269-290 PDF (2.35 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/jtcps.2022.150669.1129 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Ahmed G. Hassabo   1; Menna Zayed2; Mai Bakr2; Hanan Othman2
| ||||
| 1National Research Centre (NRC), Textile Research and Technology Institute (TRTI), Pre-treatment and Finishing of Cellulose based Textiles Department (PFCTD), El-Behouth St. (former El-Tahrir str.), Dokki, P.O. 12622, Giza, Egypt | ||||
| 2Benha University, Faculty of Applied Arts, Printing, Dyeing and Finishing Department, Benha, Egypt | ||||
| Abstract | ||||
| A carpet is a textile floor covering made comprised of the top layer of a pile that is linked to a support. A pile was historically composed of wool, but synthetic fibres like as polypropylene, nylon, or polyester, which are less expensive than wool, have become popular during the twentieth century. Carpet tiles and broadloom are the most often utilised Textile covering floorings because to excellent qualities such as elasticity and dimensional stability. So, initially, we'll discuss carpet fibre structure and features, followed by carpet yarn and the printing processes that occur on it, with a focus on the inkjet printing technique. | ||||
| Keywords | ||||
| Carpets; Classification; Manufacture; Dyeing; Printing; Finishing | ||||
|
Statistics Article View: 621 PDF Download: 1,277 |
||||
