ANALYSIS OF TRANSIENT PRESSURES IN TWO-COMPONENT TWO-PHASE FLOW | ||||
International Conference on Aerospace Sciences and Aviation Technology | ||||
Article 13, Volume 5, ASAT CONFERENCE 4 - 6 May 1993, CAIRO, May 1993, Page 143-161 PDF (2.83 MB) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/asat.1993.25618 | ||||
View on SCiNiTO | ||||
Authors | ||||
Kamel A. Elshorbagy1; Hassan A. warda2; Hesham E. abdalla3 | ||||
1Professor, Mech. Eng. Dept. | ||||
2Professor, Mech. Eng. Dept. Alex. University, Alex. Egypt. | ||||
3Major Eng. Egyptain Air Force. | ||||
Abstract | ||||
In this paper, the problem of hydraulic transients resulting from valve closure in a branched pipe carrying a two-component, two-phase flow is theoretically investigated. The governing equations were derived on the basis of one dimensional flow. The method of characteristics was used for solving the resulting differential equations. The evaluation of time interval was made in such a way to be suitable for use in a branched pipe system having branches of different lengths. The analysis of many investigated cases reveals that the maximum pressure rise increases with the increase of the delivery pipeline diameter and with the decrease of valve closure time and void fraction. Moreover the study shows that in all investigated cases, the lowest value of maximum pressure rise occurs when the piping lengths ratio C branched dead end pipe to upstream pipe lengths ) approaches unity. | ||||
Statistics Article View: 138 PDF Download: 232 |
||||