Testing the trays solar stills with yellow sand beds and reflectors
Essa, F., Abdullah, A., Alqsair, U., Alawee, W., Omara, Z., Younes, M. (2022). Testing the trays solar stills with yellow sand beds and reflectors. EKB Journal Management System, 1(1), 75-81. doi: 10.21608/jctae.2022.158806.1009
Fadl A. Essa; A.S. Abdullah; U. Alqsair; Wissam H. Alawee; Zakaria M. Omara; Mohamed Younes. "Testing the trays solar stills with yellow sand beds and reflectors". EKB Journal Management System, 1, 1, 2022, 75-81. doi: 10.21608/jctae.2022.158806.1009
Essa, F., Abdullah, A., Alqsair, U., Alawee, W., Omara, Z., Younes, M. (2022). 'Testing the trays solar stills with yellow sand beds and reflectors', EKB Journal Management System, 1(1), pp. 75-81. doi: 10.21608/jctae.2022.158806.1009
Essa, F., Abdullah, A., Alqsair, U., Alawee, W., Omara, Z., Younes, M. Testing the trays solar stills with yellow sand beds and reflectors. EKB Journal Management System, 2022; 1(1): 75-81. doi: 10.21608/jctae.2022.158806.1009

Testing the trays solar stills with yellow sand beds and reflectors

Journal of Contemporary Technology and Applied Engineering
Article 7, Volume 1, Issue 1, September 2022, Page 75-81  XML PDF (792.67 K)
Document Type: Original Article
DOI: 10.21608/jctae.2022.158806.1009
View on SCiNiTO View on SCiNiTO
Authors
Fadl A. Essa email orcid 1; A.S. Abdullah2; U. Alqsair3; Wissam H. Alawee4; Zakaria M. Omara5; Mohamed Younes6
1Mechanical Engineering Department, Faculty of Engineering, Kafrelsheikh University, Kafrelsheikh, Egypt
2Mechanical Engineering Department, College of Engineering, Prince Sattam bin Abdulaziz University, Alkharj, 16273, Saudi Arabia.
3Mechanical Engineering Department, College of Engineering, Prince Sattam bin Abdulaziz University, KSA.
4Control and Systems Engineering Department, University of Technology, Baghdad, Iraq.
5Mechanical Engineering, Faculty of Engineering, Kafrelsheikh University
6Mechanical Engineering Department, Faculty of Engineering, Kafrelsheikh University, Kafrelsheikh 33516, Egypt
Abstract
Solar still (SS) are systems powered by solar energy that can provide drinkable water, however it has a low production issue. A solar distiller's production is influenced by a variety of factors. The water depth and thermal storage beds are the most influential factors. During rainy or cloudy days (sunlight is not available) a SS cannot work in its original state. During daylight hours, the SS can be powered utilizing energy saved in thermal storage materials. This paper aims to increasing water production from brackish water or seawater using renewable energies via a system of solar desalination. An experimental work for sand beds trays solar still (TSS) was performed to enhance performance of TSS, the yellow sand used as thermal storage materials. The effects of sandy bed height (1, 2 and 3 cm) and reflectors on the TSS performance were studied. Results revealed that the sandy layer (heat storage beds) improves the TSS productivity. The maximum increase in accumulated production of sandy TSS with internal and external reflectors was reached at sand beds height of 1 cm. In this case the daily production of TSS was improved by 112% over CSS.
Keywords
Trays solar still; Solar still; Sand; Thermal storage material
Statistics
Article View: 173
PDF Download: 143