Design of A Prototype Reactor For Fuel Oil Production From Waste Tires Using Pyrolysis Process | ||||
| Egyptian Journal of Chemistry | ||||
| Article 13, Volume 62, Issue 7, July 2019, Page 1327-1334 PDF (1.35 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ejchem.2019.4682.1412 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Uthman Dawoud1; Ayman El-Gendi   1, 2; Yousef Ali Alkuraimi1
| ||||
| 1Department of Chemical and Materials Engineering, Faculty of Engineering, King Abdulaziz University, Jeddah, Kingdom of Saudi Arabia, PO box 80204 | ||||
| 2Chemical Engineering & Pilot Plant Department, Engineering Research Division, National Research Centre, 33 ElBohouth St. (Former ElTahrir St.), Dokki, Giza, Egypt, PO box 12622 | ||||
| Abstract | ||||
| Management of waste is a comprehensive challenge that effects the sustainability of eco-friendly and economic improvements. This work intended to design a prototype to produce fuel oil from waste tires by Pyrolysis process. Thus, we are looking for a new source of energy to have a benefit from waste tires which is a hazardous waste, and it causes a real problem for health and environment. In the development of the kingdom of Saudi Arabia which exactly what our government considers, and places as one of the biggest goals that is to find another source for energy in their vision 2030 for kingdom economy’s future. The prototype design is a batch reactor, and a try to achieve the best yield of fuel oil product. The result showed that, the average density of the produced fuel oil is 0.783 g/cc, and it is close to the diesel range, which is between 0.8 to 0.95 g/cc, also it is near the range of natural gasoline, which is between 0.711 to 0.737 g/cc. Consequently, the produced fuel oil is comparable with the diesel and natural gas. | ||||
| Keywords | ||||
| Fuel Oil; production; Wasted Tires; Pyrolysis Process | ||||
|
Statistics Article View: 592 PDF Download: 646 |
||||
