STUDY OF MOMENT ROTATION BEHAVIOR FOR SEMI RIGID CONNECTIONS CONSISTING OF BOLTS AND ANGLES | ||||
| International Journal of Advances in Structural and Geotechnical Engineering | ||||
| Volume 04, Issue 03, August 2020, Page 98-111 PDF (2.09 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/asge.2020.270807 | ||||
 View on SCiNiTO | ||||
| Abstract | ||||
| The objectives of this paper are to study the effect of different parameters for steel bolted angle connection on moment-rotation behavior under monotonic loading. ABAQUS software is used to develop analytical models based on the previous experimental studies and their accuracy is examined. Using verified analytical models, a parametric study is then carried out to study the moment-rotation behavior with variations in: beam size, top angle thickness, and bolt gauge distance. From the results, the bi-linear moment rotation diagram for the connection is determined and the following results were obtained with respect to the initial stiffness, post-limit stiffness, plastic flexural resistance moment, plastic rotation, ultimate moment, and ultimate rotation. Finally, the effect of each parameter on moment-rotation behavior of the bolted angle steel connection is discussed in detail, and a proposed formula between each parameter and results is estimated. | ||||
|
Statistics Article View: 17 PDF Download: 37 |
||||
