Improve the Efficiency of the Connections Between Circular Columns and End-Plate | ||||
ERJ. Engineering Research Journal | ||||
Article 15, Volume 46, Issue 1, January 2023, Page 159-169 PDF (1.46 MB) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/erjm.2022.166439.1219 | ||||
View on SCiNiTO | ||||
Authors | ||||
Ahmed M. Abd El-ghany1; Boshra A. Eltaly 2; Kamel S. Kandeel 3; Mahmoud S. Elnagar4 | ||||
1civil engineer department - Faculty of Engineering - Menoufia University | ||||
2Civil Engineering, Menoufia University | ||||
3Department of Civil Engineering, Faculty of Engineering, Menoufia University | ||||
4Civil engineering department menofia university | ||||
Abstract | ||||
This study aims to look into a new low-cost connection that can be readily established on the site. Similarly, to improve the efficiency of the connections and investigate the various variables that influence their capacity. Several studies focused on the behavior of these connections under various types of loads, which led to the discovery of their weak points, the ideal strength method for these connections under various loads, the best method of erection, as well as the cost and the time of construction. In the research's experimental part, a vertical force was applied to three types of connections between a circular column and end plate. The connection was strengthened by filling the column with concrete and welding two circular bars in the tension and compression zones. The tested connections were analysed using a computer program in the numerical analysis section (ANSYS 16). Finite element results were validated with experimental results. | ||||
Keywords | ||||
End-plate connections; circular column; composite section; Moment rotation curve; Finite element analysis | ||||
Statistics Article View: 118 PDF Download: 122 |
||||