Physico-chemical and Mechanical Properties of Eco-friendly Ultra-lightweight Geopolymers Containing Silica Sand Fluor and Calcium Carbonate
Abbas, A., Soltan, M., Khater, H., El-Nawawy, M., Sayed, A. (2022). Physico-chemical and Mechanical Properties of Eco-friendly Ultra-lightweight Geopolymers Containing Silica Sand Fluor and Calcium Carbonate. EKB Journal Management System, 111(1), 43-59. doi: 10.21608/tims.2023.183898.1008
Ahmed M. Abbas; Mohamed E Soltan; Hisham M. Khater; Mohamed A. El-Nawawy; Ahmed Z Sayed. "Physico-chemical and Mechanical Properties of Eco-friendly Ultra-lightweight Geopolymers Containing Silica Sand Fluor and Calcium Carbonate". EKB Journal Management System, 111, 1, 2022, 43-59. doi: 10.21608/tims.2023.183898.1008
Abbas, A., Soltan, M., Khater, H., El-Nawawy, M., Sayed, A. (2022). 'Physico-chemical and Mechanical Properties of Eco-friendly Ultra-lightweight Geopolymers Containing Silica Sand Fluor and Calcium Carbonate', EKB Journal Management System, 111(1), pp. 43-59. doi: 10.21608/tims.2023.183898.1008
Abbas, A., Soltan, M., Khater, H., El-Nawawy, M., Sayed, A. Physico-chemical and Mechanical Properties of Eco-friendly Ultra-lightweight Geopolymers Containing Silica Sand Fluor and Calcium Carbonate. EKB Journal Management System, 2022; 111(1): 43-59. doi: 10.21608/tims.2023.183898.1008

Physico-chemical and Mechanical Properties of Eco-friendly Ultra-lightweight Geopolymers Containing Silica Sand Fluor and Calcium Carbonate

The Bulletin Tabbin Institute for Metallurgical Studies (TIMS)
Volume 111, Issue 1, November 2022, Page 43-59  XML PDF (694.04 K)
Document Type: Original research papers
DOI: 10.21608/tims.2023.183898.1008
View on SCiNiTO View on SCiNiTO
Authors
Ahmed M. Abbas1; Mohamed E Soltan1; Hisham M. Khaterorcid 2; Mohamed A. El-Nawawy1; Ahmed Z Sayed email orcid 1
1Chemistry Department, Faculty of Science (Boys), Al-Azhar University, 11884, Nasr City, Cairo, Egypt.
2Housing and Building National Research Center (HBNRC), P.O. Box 1770, Cairo, Egypt
Abstract
Low-cost lightweight geopolymer mortars based on Ground Granulated blast-furnace slag, calcium carbonate, and silica sand flour were investigated as lightweight building material. The effect of two chemical foaming agents such as hydrogen peroxide (H2O2) and sodium perborate tetrahydrate (NaBO3.4H2O) on bulk density, porosity, and compressive strength was studied. FTIR, XRD, XRF, and SEM were used to investigate the raw materials and selected samples of prepared lightweight geopolymers. The use of grinding calcium carbonate and silica sand flour enhanced the compressive strength, workability, and homogeneity of the geopolymer.

The lightweight geopolymer given about 3.30 - 17.60 and 1.70 - 6 MPa of compressive strengths at 28 days of curing with bulk densities from 584 to 1340 kg/m3 and 745 to 1770 kg/m3 in the case of hydrogen peroxide and sodium perborate mixes, respectively. The images of morphology and microstructure results indicate that the porosity and pore size increase with the increase of the foaming agent due to the release of oxygen gas upon its decomposition. According to the results of bulk density MC-H1, MC-H1.25, and MC-B2.5 mixes can be considered ultra-lightweight geopolymers with proper compressive strength. The results show that hydrogen peroxide mixes have better performance in the physico-chemical and mechanical properties than sodium perborate mixes.
Keywords
Lightweight geopolymers; hydrogen peroxide; sodium perborate; grinding calcium carbonate; silica sand flour
Statistics
Article View: 157
PDF Download: 124