Development of a Controlled Semi-Active Prosthetic Ankle | ||||
Journal of Advanced Engineering Trends | ||||
Volume 42, Issue 2, July 2023, Page 155-161 PDF (770.93 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/jaet.2022.106976.1131 | ||||
View on SCiNiTO | ||||
Authors | ||||
Emad G Shehata 1; Mariem Y. William2; Ahmed Abdel Tawab Hassan3; Khalil Ibrahim4 | ||||
1Electrical Engineering Dept., Faculty of Engineering, Minia University, Egypt | ||||
2Department of Mechatronics Engineering, High Technology and Engineering Institute in New Minia, Minia, Egypt | ||||
3Department of Electrical Engineering, Faculty of Engineering, Minia University, Minia, Egypt. | ||||
4Department of Mechanical Engineering, Faculty of Engineering, Assiut University, Assiut, Egypt | ||||
Abstract | ||||
In this paper, a controlled semi-active ankle prosthetic using parallel and series spring systems was developed. The proposed model of the controlled semi-active prosthetic ankle is composed of parallel springs, leaf series springs, and a cam. for reduction torque and power consumption as much as feasible, the parallel and series springs must function as a nonlinear system. As a result, the cam system is used, which has parallel and series springs. The controlled semi-active ankle prosthetic with parallel and leaf series spring was modelled using the CAD-CAM software. the performance of the proposed model and a non-amputee ankle is compared. The results show that the controlled semi-active ankle prosthetic behaves similarly to a non-amputee ankle. The power consumption of the motor has been reduced by 51.67 percent which indicates that the proposed model has high efficiency. The angle and torque of the controlled semi-active ankle prosthetic are strikingly like those of non-amputee ankles. | ||||
Keywords | ||||
Controlled Semi Active Prosthetic Ankle; Leaf series springs system; parallel spring system | ||||
Supplementary Files
|
||||
Statistics Article View: 167 PDF Download: 294 |
||||