Comparative Stress Analysis Study Of CAD/CAM Milled PEEK And Zirconia Primary Copings In Double Crown PEEK Framework Mandibular Partial Denture After 1 Year Simulated Function
Homossany, M., Mohamed, H. (2023). Comparative Stress Analysis Study Of CAD/CAM Milled PEEK And Zirconia Primary Copings In Double Crown PEEK Framework Mandibular Partial Denture After 1 Year Simulated Function. EKB Journal Management System, 69(1), 639-651. doi: 10.21608/edj.2023.172395.2334
Mahmoud Homossany; Hebatallah Mohamed. "Comparative Stress Analysis Study Of CAD/CAM Milled PEEK And Zirconia Primary Copings In Double Crown PEEK Framework Mandibular Partial Denture After 1 Year Simulated Function". EKB Journal Management System, 69, 1, 2023, 639-651. doi: 10.21608/edj.2023.172395.2334
Homossany, M., Mohamed, H. (2023). 'Comparative Stress Analysis Study Of CAD/CAM Milled PEEK And Zirconia Primary Copings In Double Crown PEEK Framework Mandibular Partial Denture After 1 Year Simulated Function', EKB Journal Management System, 69(1), pp. 639-651. doi: 10.21608/edj.2023.172395.2334
Homossany, M., Mohamed, H. Comparative Stress Analysis Study Of CAD/CAM Milled PEEK And Zirconia Primary Copings In Double Crown PEEK Framework Mandibular Partial Denture After 1 Year Simulated Function. EKB Journal Management System, 2023; 69(1): 639-651. doi: 10.21608/edj.2023.172395.2334

Comparative Stress Analysis Study Of CAD/CAM Milled PEEK And Zirconia Primary Copings In Double Crown PEEK Framework Mandibular Partial Denture After 1 Year Simulated Function

Egyptian Dental Journal
Article 20, Volume 69, Issue 1 - Serial Number 4, January 2023, Page 639-651  XML PDF (664.9 K)
Document Type: Original Article
DOI: 10.21608/edj.2023.172395.2334
View on SCiNiTO View on SCiNiTO
Authors
Mahmoud Homossany email orcid ; Hebatallah Mohamedorcid
Associate Professor, Removable Prosthodontics Department. Ain Shams University, Cairo, Egypt
Abstract
Aim of the study: The objective was to asses and compares the effect of PEEK and Zirconia primary copings in milled double crown PEEK framework. Materials and methods: One cast was fabricated simulating Kennedy Class I with the premolars as the last standing abutment. The primary copings were classified into two groups, milled PEEK group I and milled Zirconia group II. Two milled PEEK frameworks were used. Four strain gauges were installed bilaterally in the model. A load of 100 N was applied to the area of the first molar bilaterally. The same procedure was repeated 10 times. Cyclic loading was applied simulating 1 year of function. Strains induced on the abutments during bilateral loading were evaluated before and after chewing simulation. Results: The highest compressive micro-strain was recorded at channel (4) after cyclic loading for PEEK group 359.00±5.055 µm/m followed by channel (2) 356±13.293 µm/m. While the least compressive micro-strain was recorded at channel (1) before cyclic loading for the Zirconia was 150±7.817 µm/m. There was significant difference in channels (2) and (4) regarding PEEK group before and after cyclic loading. While for Zirconia group there was significance difference in channels (1) and (3) before and after cyclic loading where P value was
Keywords
PEEk; Double Crown; Strain gauge; Partial Denture; Chewing simulation
Statistics
Article View: 268
PDF Download: 260