ASSESSMENT OF OFFSITE POWER RELIABILITY FOR NUCLEAR POWER PLANTS BY FAULT TREE ANALYSIS | ||||
| Journal of Al-Azhar University Engineering Sector | ||||
| Article 28, Volume 14, Issue 50, January 2019, Page 99-107 PDF (251.57 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/auej.2019.28510 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| A M Agwa1; E A Eisawy2; H M Hassan2 | ||||
| 1Faculty of Engineering - Al-Azhar University | ||||
| 2Nuclear and Radiological Regulatory Authority | ||||
| Abstract | ||||
| The reliability of offsite power for a nuclear power plant (NPP) is assessed using fault tree (FT) analysis. The method combines alternating current (AC) load flow analysis with FT technique. The probability of loss of offsite power (LOOP) initiating event is assessed based on the unreliability of the power delivered to the house load of the NPP. Based on the quantitative and qualitative analysis of the constructed FT, the probability of the LOOP initiating event is assessed. The FT results include the importance measures which enable identification of the most important elements of the power system from the aspect of nuclear safety. The impact of changes in the power system to the safety of the NPP is evaluated. The verification of the method was performed on the IEEE test system. | ||||
| Keywords | ||||
| Nuclear power plant; Loss of Offsite Power; Fault Tree | ||||
|
Statistics Article View: 238 PDF Download: 390 |
||||
