DESIGN OF SOL-GEL COPPER OXIDE BASED COATING FOR SOLAR ENERGY APPLICATIONS | ||||
Journal of Al-Azhar University Engineering Sector | ||||
Article 31, Volume 14, Issue 50, January 2019, Page 245-257 PDF (429.07 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/auej.2019.28513 | ||||
View on SCiNiTO | ||||
Authors | ||||
Amany Khaled1, 2; Nahed El-Mahallawy2; Madiha Shoeib3; R A Atia1 | ||||
1Dept. of Mechanical Engineering, Arab Academy for science technology and maritime transport, Cairo, Egypt | ||||
2Dept. of Production and Mechanical Design, Ain Shams University, Cairo, Egypt | ||||
3Central Metallurgical Research Center, Cairo, Egypt | ||||
Abstract | ||||
Solar energy harvesting is of a great interest lately as it’s a clean and environmentally friendly energy source. Therefore, Solar selective coatings development became one of the pioneering research routes nowadays. Copper oxide based films were prepared by a sol-gel route and deposited on a stainless steel substrate via dip coating. The solution was prepared with several concentrations of polyethylene glycol as a surfactant and agglomeration controlling agent. The effect of several concentrations on the optical properties was studied. The microstructure of the coats was discussed in details reflecting on the optical properties as well. In general, the copper oxide based coats have shown uniform and dark visual appearance with acceptable adherence. The coats have been successfully prepared and analysed with a promising absorptivity up to 96.3% with an optical band gap that varies between 2.5eV and 3.03eV. | ||||
Keywords | ||||
Solar selective coating; Copper oxide; PEG; sol-gel; bandgap; Characterization | ||||
Statistics Article View: 252 PDF Download: 888 |
||||