Experimental research on composite deck bridges with encased steel beams | ||||
Delta University Scientific Journal | ||||
Volume 6, Issue 1, April 2023, Page 31-38 PDF (792.66 K) | ||||
Document Type: Original research papers | ||||
DOI: 10.21608/dusj.2023.291004 | ||||
![]() | ||||
Authors | ||||
Mohamad Al Ali1; Vincent Kvočák* 1; Daniel Dubecký* 2; Anatoliy V. Alekseytsev* 3 | ||||
1Institute of Structural and Transport Engineering, Faculty of Civil Engineering, Technical University of Košice, Košice, Slovak Republic | ||||
2Center of Research and Innovation in Construction, Faculty of Civil Engineering, Technical University of Košice, Košice, Slovak Republic. | ||||
3Moscow State University of Civil Engineering, Moscow, Russian Federation | ||||
Abstract | ||||
Deck bridges with encased steel beams are commonly used for short-spans bridge structures. This type of bridge structures minimizes steel consumption without significantly affecting the overall resistance of the structure [1 and 2]. The paper presents basic information and partial results from experimental research on composite steel-concrete deck bridges with different types of encased steel beams. The paper also provides an overview about the experimental program, the production process of the tested members, an explanation of the applied load and the measurement of monitored strains and deflections of the tested members. | ||||
Keywords | ||||
Deck bridges; Encased beams; Experimental tests; Composite beams | ||||
Statistics Article View: 78 PDF Download: 93 |
||||