A Laser Shadowgraphy Methodfor Studying Vibrations of Incandescent Solids | ||||
| The International Conference on Mathematics and Engineering Physics | ||||
| Article 12, Volume 9, International Conference on Mathematics and Engineering Physics (ICMEP-9), April 2018, Page 1-9 PDF (1.51 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/icmep.2018.29584 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| H. S. Ayoub1; Ashraf F. El-Sherif2; H. H. Hassan1; S. A. Khairy1 | ||||
| 1Department of Physics, Faculty of Science, Cairo University, Cairo, Egypt. | ||||
| 2Laser Photonics Research Center, Departmentof EngineeringPhysics, Military Technical College, Cairo, Egypt. | ||||
| Abstract | ||||
| Abstract: This paper discusses a newlaser shadowgraphymethodfor investigating the in-plane vibration of refractory solid objects at incandescent temperatures.The method is applied whenever the use of Doppler laser vibrometer is inefficient due to small dimensions, high luminosity and poor reflectivity of the test object. We designed an experimental setup that included a modulatedlaser to backlight the vibrating object and to generate an analogue shadowgraph,a photo-detector installed in front of the shadowgraph, isconnected to a lock-in amplifier, and synchronized by the laser modulator,to retrieve the vibration signal from the noisy optical background. The methodwasapplied successfully to detect the resonance frequency of tungsten filament atincandescencetemperature inside an automotive lamp as a proof of concept. This method can be also adapted to test the thermo-elastic characteristics of refractory alloy samples,the mechanical properties of high temperature refractory MEMS lightingsandnano-structured tungsten based advanced thermal shock-resistant lighting sources. | ||||
| Keywords | ||||
| Incandescent temperatures; non-Dopplervibrometry; laser shadowgraphy; low cost method | ||||
|
Statistics Article View: 330 PDF Download: 262 |
||||
