Development of Pilot Scale System for Production of Nylon-6 Fibers Grafted with Polydimethylaminoethylmathacrylate (PDMAEMA) for the Application as Ion Exchange | ||||
Egyptian Journal of Chemistry | ||||
Article 12, Volume 62, Issue 9, September 2019, Page 1713-1723 PDF (1.35 MB) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/ejchem.2019.6778.1566 | ||||
View on SCiNiTO | ||||
Authors | ||||
Samy Elsebaie Shalaby 1; Naser Gad Al-Balakocy 2; Samiha Abo El-Ola 3; margrita bilyakova4 | ||||
1Proteninic & Manmade Fibers Department, Textile Research Division, National Research Centre, Dokki, Cairo, Egypt | ||||
2Proteinic & Man made fibers | ||||
3Proteinic and Man Made Fibres, Textile Research Division, National Research Centre | ||||
4Preparation and finishing of cellulose fibers department | ||||
Abstract | ||||
In this work an affective and simple technology for pilot scale production of grafted Nylon-6 fibers with Polydimethylaminoethylmathacrylate (PDMAEMA) for ion exchange application is suggested. This technology consists of the creation of antimicrobial substance (AS) in Nylon-6 fibers followed by grafting with dimethylaminoethylmathacrylate (DMAEMA) using Cu2+-K2S2O8 redox system. Factors affecting the yield of grafted PDMAEMA were investigated and the optimal conditions for grafting process were evaluated. The availability of modified Nylon-6 fibers grafted with PDMAEMA as polymer sorbent for removal of cations as Cu+2, Pb+2 and anions Cr2O7-2, SO4-2 was investigated. The influence of various adsorption parameters on the degree of extraction (R %) and adsorption capacity (SC mg/g) was calculated. | ||||
Keywords | ||||
Nylon-6; Grafting, Fibers, PDMAEMA, Ion-exchanger | ||||
Statistics Article View: 511 PDF Download: 362 |
||||