Wool/polyester blends with UV protection and disperse printing | ||||
| International Design Journal | ||||
| Article 9, Volume 12, Issue 3 - Serial Number 44, May and June 2022, Page 105-110 PDF (1.04 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/idj.2022.129170.1042 | ||||
 View on SCiNiTO | ||||
| Author | ||||
Heba Mohamed Khalil 
| ||||
| Applied arts.Helwan Univerisity | ||||
| Abstract | ||||
| • Background and problem UVR is an electromagnetic radiation between the wavelength 150-400 nm. The UV-radiation is divided into UV-A (315-400 nm), UV-B (280-315 nm) which burns and skin cancer, and UV-C (100-280 nm). This type is completely absorbed by the oxygen and ozone from the atmosphere and does not reach the Earth's surface. Therefore, in recent years, researchers have devoted efforts to add or improve the properties of protection against the harmful UVR and their negative impact such as damage, skin photo cancer…etc by using UV-absorber such as derivatives of o–hydroxybenzophenones, o– hydroxyphenyl triazes, o–hydroxy phenyl hydrazines and/or inorganic UV-blockers like ZnO nanoparticles and TiO2 nanoparticles. The extent of UV-protection is governed by type of fibre, fabric construction, used coloring agents as well as finishing treatments. • The main task and results of the research The goal of this research is to develop a simultaneous process for upgrading the disperse printability and UV- blocking functionality of wool/polyester blend via incorporation of UV-SUN® CEL LIQ, as UV-absorber, or TiO2-NPs, as UV-blocker, into the disperse printing formulation [βCD, Na-alginate, Citric acid, DMDHEU, PEG-600, and Disperse dye]. The obtained results revealed that: 1- Functionalized wool/polyester disperse prints were obtained by individal inclusion of UV-SUN® CEL LIQ, or TiO2-NPs and β-CD in print formulation, followed by printing and steam fixing. 2- The enhancement in UPF values of the produced disperse prints, as a UV-protecting agent, follows the descending order: TiO2-NPs > UV-SUN® CEL LIQ,>> none. 3- Fastness properties were very good to excellent. | ||||
| Keywords | ||||
| Wool/polyester blended fabric; disperse printing; UV-protecting; UV-absorber; or UV-blocker | ||||
|
Supplementary Files
|
||||
| References | ||||
|
1. Zhou Y, Yang ZY and Tang RC. (2020). Facile and green preparation of bioactive and UV protective silk materials using the extract from red radish (Raphanus sativus L.) through adsorption technique. Arab Journal Chem 13, 3276–3285. 2. Ibrahim, N. A., Gouda, M., Husseiny, Sh. M., El-Gamal, A. R., and Mahrous, F., (2009). UV-protecting and antibacterial finishing of cotton knits. Journal of Applied Polymer Science, 112, 3589–3596. 3. Schindler, W. D. & Hauser, P. I. (2004). Chemical Finishing of Textiles. Woodhead Publishing Ltd, England , p. 120-126, 157-160. 4. Abidi, N., Hequete, E., Tarimala, S. & Dai, L. L. (2007). Cotton fabric surface modification for improved UV-radiation protection using sol- gel process. Journal of Applied Polymer Science, 104, 111-117. 5. Ibrahim, N. A., El-Zairy, E. M. R., Abdalla, W. A. & Khalil. H. M. (2013). Combined UV-protecting and reactive printing of cellulosic/wool blends. Carbohydrate Polymers, 92, 1386-1394 6. Ibrahim, N. A., Khalil. H. M., El-Zairy, E. M. R. & Abdalla, W. A. (2013). Smart options For simultaneous functionalization and pigment coloration of cellulosic/wool blends. Carbohydrate Polymers, 96, 200-210. 7. Hustvedt, D., & Crews, P. (2005). The ultraviolet protection factor of naturally pigmented cotton. The Journal of Cotton Science, 9, 47-55. 8. Saravanan, D. (2007). UV Protection textile material. AUTEX Research Journal, 7, 53-62. 9. Alebeid, Omar Kamal & Zhao, Tao. (2017). Review on: developing UV protection for cotton fabric. The Journal of The Textile Institute, Dol: 10. 1080/00405000. 2017.1311201. 10. Becheri, A., Maximilian, D., Nostro, P. L., & Baglioni, P. (2008). Synthesis and characterization of zince oxide nanoparticles: Application of textiles as UV-absorbers. Journal of Nanoparticle Research, 10, 679-689. 11. El-Shafei, A., & Abou-Okeil, A. (2011). ZnO/carboxymethyl chitosan bionano-composite to impart antibacterial and UVprotection for cotton fabric. Carbohydrate Polymers, 83, 920-925. 12. Yazdanshenas, M. E., & Mohammad, S. K. (2013), Bifunctionalization of cotton textiles by ZnO nanostructures: Antibacterial activity and ultraviolet Protection. Textile Research Journal, 83, 933-1004. 13. Hossain, M. A., Rahman, M. (2015). A review of nano particle usage on textile material against ultraviolet radiation. Journal of Textile Science and Technology, 1, 93-100. 14. Bae, H. S., Lee, M. K., Kim, W. W., & Rhee, C. K. (2003). Dispersion properties of TiO2 nano-power synthesized by homogeneous precipitation process at low temperatures. Colloids and Surfaces A: Physicochemical Engineering Aspects, 220, 169-177. 15. Roessler, S., & Zimmermann, R. (2002). Characterization of oxide layers on Ti6A14V and titanium by streaming potential and steaming current measurements. Colloids and Surfaces B: Biointerfaces, 25, 387-395. 16. Mahltig, B., Helfried, H., & Bttcher, H. (2005). Functionalisation of textiles by inorganic sol-gel coatings. Journal of Materials Chemistry, 15, 4385-3498. 17. Po-Hsun, L., Ashok Kumar, S., & Shen-Ming, C. (2008). Amperometric determination of H2O2 at nano-TiO2/DNA/thionin nanocomposite modified electrode, Colloids and Surfaces B, 66, 266-273. 18. Judd, D. & Wyszeck, G. (1975). Color in business science and industry, 3rd edition, John Wiley & Sons. New York. 19. Ibrahim, N. A., Khalil. H. M. & Eid, B. M. (2015). A cleaner production of ultra-violet shielding wool prints. Journal of Cleaner Production, 92, 187-195. 20. Khalil, H. M, (2017). Simultaneous disperse printing and uv-protecting of wool/polyester blended fabric. International Design Journal, 7, 387-392. 21. Denter, U.& Schollmeyer, E. (1996). Surface modification of synthetic and natural fibres by fixation of cyclodextrin derivatives. J. Inclusion phenomena & Molecular Recognition in Chemistry, 25, 197-202. 22. Ibrahim, N. A., El-Zairy, E. M. R., El-Zairy, M. R. & Khalil. H. M. (2010). Improving transfer printing and ultraviolet blocking properties of polyester-based textiles using MCT- β -CD, chitosan and ethylenediamine. Coloration Technology, 126, 330-336. 23. Ibrahim, N. A., Abo-Shosha, M. H., Allam, E. A. & El-Zairy, E. M. (2010). New Thickening agents based on tamarind seed gum and karaya gum polysaccharides. Carbohydrate Polymers, 81, 402-408. 24. Ibrahim, N. A., El-Zairy, E.M.R., El-Zairy, M. R.& Khalil, H. M. (2011). Enhancing of printing and UV-blocking properties of polyester and polyester/wool fabrics by aminolysis. AATCC Review, 11, 52-58. 25. Hong, K. H. & Sun, C. (2008). Antimicrobial and chemical detoxifying functions of cotton fabrics containing different benzophenone derivatives. Carbohydrate Polymers, 71, 598-605. 26. Bringer, J. & Hofer, D. (2004). Nanotechnology and its applications. Mellaind Int., 10 (4), 295-296. 27. Ibrahim, N. A., Amr, A., Eid, B. M., Mohamed, Z. E. & Fahmy, H. (2012). Poly (acrylic acid)/ poly (ethylene glycol) adduct for attaining multifunctional cellulosic fabrics. Carbohydrate Polymers, 89, 648-660. 28. Yang, H., Zhu, S.& Pan, N. (2004). Studying the mechanisms of titanium dioxide as ultraviolet-blocking additive for films and fabrics by an improved scheme, J. Appl. Polym. Sci., 92, 3201-3210. 29. Alya. M., Al-Etabibi and Morsy Ahmed El-Apasery. (2020). Nano TiO2 imparting multifunctional performance on dyed polyester fabric with some disperse dyes using high temperature dyeing as an environmentally benign method. International Journal of Environmental Research and Public Health, 17, 1377-1385. 30. Morabito, K., Shapley, N. C., Steeley, K. G. & Tripathi, A. (2011). Review of sunscreen and the emergence of nano-conventional absorbers and their application in ultraviolet protection. Int. J. Cosmetic Sci. 33, 385-390 | ||||
|
Statistics Article View: 53 PDF Download: 159 |
||||
