Plasma Application in Textiles | ||||
| Journal of Textiles, Coloration and Polymer Science | ||||
| Article 2, Volume 16, Issue 1, July 2019, Page 15-32 PDF (1.58 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/jtcps.2019.5428.1006 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Hend Mohamed  ; A.A. El-Halwagy1; Amal abdel-Aaty1; A. A. Garamoon2
| ||||
| 1Dyeing, Printing and Auxiliaries Department, Textile Research Division, National Research Centre, Cairo | ||||
| 2Center of plasma technology, Faculty of science, Al-Azhar University, Nasr city, Cairo, | ||||
| Abstract | ||||
| Chemical modification of cellulosic fabrics was early used as a tool for imparting to it new properties and increasing its effective application for different end-uses. Nowadays, physical technologies can advantageously replace some of these chemical modifications as environmental friendly processes. Plasma treatment is considered one of these physical technologies applied to nearly all the synthetic and cellulosic textile fabric. It modifies the fiber surface and leaves the bulk characteristics unaffected. It is fast growing field and finds some potential applications as an environmentally friendly process. Plasma treatment does not involve handling of hazardous chemicals and thus there are no problems of effluents compared with the chemical treatment. | ||||
| Keywords | ||||
| plasma; textile; modification | ||||
|
Statistics Article View: 368 PDF Download: 816 |
||||
